To whom it may concern,
I am developing a cooling system with TRNSYS18 and I have several problems when I try to connect as an input the heat transfer of the coils in the chambers by using the Cooling Type Manager. You have an example below:
Where Q_evap4C, Q_evap8C, Q_carga4C and Q_descarga4C are the “Air Side Heat Transfer” output of the cooling coils.
When I use it as an input for the power available in each cooling zone, the cooling demand of the zone is zero which is non-sense. Any way to figure it out?
Thanks in advance and sorry for the inconvenience,
Best regards.
Jose Javier.