Dear Tim.Thanks for your reply. I have tried to recompile the component source code, but an error occurred (see attached). The component was previously created using the TRNSYS16 template (with argument list). Then, I tried to recompile another component source code created using the TRNSYS17 template. No error was found. Do it mean that I need to convert all the component source codes which were developed using the TRNSYS16 template to the ones based on the TRNSYS17 template in order to recompile to the 64-bit version for use in TRNSYS18? Please advise. Thank you!
Best Regards C K Lee City University of Hong Kong On 2021-04-16 21:22, Tim McDowell via TRNSYS-users wrote:
C K Lee - As you are using the 64-bit version of TRNSYS you will need to recompile your Type243.dll as a 64-bit dll. Regards, Tim --- Timothy P. McDowell Executive Vice President Thermal Energy System Specialists, LLC 3 N Pinckney St, Suite 202 Madison, WI 53703 office: 608-274-2577 cell: 608-225-5250 On 2021-04-16 00:27, C K Lee via TRNSYS-users wrote:Dear all. I try to run a project file in TRNSYS18 which was previously created in TRNSYS17. However, I encountered an error saying that Type243 was called but could not find the dll file. Meanwhile, I got the message that Type243.dll was found (see attached screenshot). Can anyone help me to solve the problem? Thank you! Best Regards C K Lee City University of Hong Kong _______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
Attachment:
TypeStudio error.jpg
Description: JPEG image
