Dear
David,
Many
thanks for the answer.
I
realize that my question was not specified correctly.
To answer your questions:
-
The dlls are correctly
located
-
I am running Trnsys 17,
so I should not have any compatibility problem between
32-bit and 64-bit dlls.
Can
you help me further ?
Regards,
Xavier
De : David
BRADLEY <d.bradley@tess-inc.com>
Envoyé : vendredi, 22 janvier 2021 17:12
À : TRNSYS users mailing list at OneBuilding.org
<trnsys-users@lists.onebuilding.org>
Cc : Jobard Xavier
<xavier.jobard@heig-vd.ch>
Objet : Re: [TRNSYS-users] error with dll found
but is not loading the type on Virtual Machine Win10
Xavier,
I think the first thing to check is to
make sure that the dlls containing Types832 and 6139 are in
the appropriate subdirectory of .\TrnsysXX\UserLib. The
other thing that occurs to me is that there may be a
mismatch between 64- and 32- bit versions. If those Types
are compiled as 32-bit dlls they will not be found by the
64-bit Trnsys18 even if the files are in the correct
location.
I apologize if these suggestions are very
basic!
kind regards,
David
On 01/21/2021 10:13,
Jobard Xavier via TRNSYS-users wrote:
Dear TRNSYS user,
I am trying to run a Trnsys deck with non-standard types (Type 832 and Type 6139) on a virtual machine (win10).
A simple example (SDHW.dck) works fine. However my deck with type832 and type6139 which works fine on my laptop throws the errors but are actually listed as found further up the log file :
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 832
TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file
Reported information : Type832 could not be located in either the trndll.dll or in an external dll. Please relink theTRNDll.dll including this Type or make sure that an external DLL in the \UserLib\DebugDLLs and \UserLib\ReleaseDLLs folders contain the Type.
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 6139
TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file
Reported information : Type6139 could not be located in either the trndll.dll or in an external dll. Please relink theTRNDll.dll including this Type or make sure that an external DLL in the \UserLib\DebugDLLs and \UserLib\ReleaseDLLs folders contain the Type.
These 2 types are distributed by research institutes and were not recompiled in any way. Type 832 was used on several machines without problem before.
Can somebody help ?
Xavier Jobard
Ing. INSA Strasbourg
Collaborateur Ra&DInstitut de Génie Thermique (IGT)
Laboratoire d’énergétique solaire et de physique du bâtiment (LESBAT)
Prof. :
+41 24 557 28 17
Site web :
_______________________________________________TRNSYS-users mailing listTRNSYS-users@lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI 53703 USA
P:+1.608.274.2577
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com