[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] HELP with TRNSYS3D

Toni,

 I think the problem with your file is that the basement ceiling is a single surface that does not correspond to (ie is not the same size and shape as) the floors of the zones above. Like we did with the other case, you have to draw lines on the basement ceiling that correspond to each of the floor plates of the zones above. Since you have 14 zones that make up the floor above, your basement ceiling needs to be cut into 14 pieces.

kind regards,

 David


On 01/13/2021 06:02, Toni Calabrese via TRNSYS-users wrote:

Hi everyone,

I have a huge problem and I do not know if it is a problem in Trnsys3D or TRNBUILD. Attached you can find the IDF file. I drawn a complete flat (Ground Floor) and below it I drawn the cellar as a single zone connected to the ground floor.

 

Could you firstly check if all the walls (in particular ADJ Walls between the rooms of the ground floor and the ceiling between ground floor and cellar) are defined correctly?

 

I tried to import this model in Trnsys via 3d Wizard but it is not able to import the model (it is always loading the file) and I do not know why.

 

Could you maybe try to import it in trnsys and see if in your case it works?

 

Thanks a lot and have a nice day.

 

 

 

Toni Calabrese, MSc.

Wissenschaftlicher Projektmitarbeiter

toni.calabrese@spf.ch | toni.calabrese@ost.ch

 

T +41 58 257 4827

 

SPF Institut für Solartechnik

OST – Ostschweizer Fachhochschule

Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch | www.ost.ch

 

OST – Ostschweizer Fachhochschule ist der Zusammenschluss aus FHS St.Gallen, HSR Rapperswil und NTB Buchs.

 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com