Hallo Filippo,
I suppose that you are Italian. In case let me know and I will write you in Italian.
If you want to model the night cooling, you can follow two approaches:
1. You could use Type 2 (controller) in order to get 1 in case the external temperature is lower than a certain value
2. You could use an equation. Please have a look in the EQUATION Statement and you can learn how to set an equation with the function "GT" or "LT".
You can follow the first or the second approach depending on your experience with TRNSYS. Maybe it would be easier for you to start with the second approach.
I hope I helped you
Toni Calabrese, MSc.
Wissenschaftlicher Projektmitarbeiter
toni.calabrese@spf.ch | toni.calabrese@ost.ch
T +41 58 257 4827
SPF Institut für Solartechnik
OST – Ostschweizer Fachhochschule
Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch | www.ost.ch
OST – Ostschweizer Fachhochschule ist der Zusammenschluss aus FHS St.Gallen, HSR Rapperswil und NTB Buchs.
From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>
On Behalf Of Filippo Angeli via TRNSYS-users
Sent: Tuesday, January 5, 2021 8:25 PM
To: trnsys-users@lists.onebuilding.org
Cc: Filippo Angeli <filippoangeli24@yahoo.it>
Subject: [TRNSYS-users] night free cooling
Good evening, I want to include night free cooling in my building during the summer season. How can I build a function that regulates the night ventilation air flow rate, so that free cooling occurs when I have an external temperature greater than 15 ° C? Furthermore, I want night free cooling to occur only in certain external temperature conditions (for example greater than 24 ° C). Thanks a lot.