[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Why type11d changes the outlet temperature?



Hooman Azad -

If you are wanting to simply mix two fluid streams together use the "Tee Piece" component (11h) rather than the "Controlled Flow Mixer" component (11d).

Regards,

Tim

 

---
Timothy P. McDowell Executive Vice President Thermal Energy System Specialists, LLC 3 N Pinckney St, Suite 202 Madison, WI 53703 office: 608-274-2577 cell: 608-225-5250

On 2020-06-05 05:10, Hooman Azad via TRNSYS-users wrote:

Dear friends

In Figure 1 the outlets of two collectors (CPC 1 and CPC 2) with the same temperatures are connected to a type11d (Mixer). Although type11d is not supposed to change the temperatures, the mixer’s outlet temperature in Figure 2 is something fixed, not equal to inlet temperatures…. I wonder why.

Thanks for your help

Hooman


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org