Hi Alexander,
Just open TRNBuild of a building, select Zone, and in the top right side of the window, there is a Green comfort symbol.
In this Comfort manager, you can select new and define different factors accordingly.
Also, for the outputs, just open output manager, select zone and in comfort outputs, you can define outputs for PMV and PPD.
Best Regards
____________________________
M.Sc. Bharat Chhugani
Institut für Solarenergieforschung GmbH
Am Ohrberg 1
D-31860 Emmerthal
-----Original message-----
From: Alexander Schneider via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Sent: Friday 3rd April 2020 17:51
To: trnsys-users@lists.onebuilding.org
Cc: Alexander Schneider <alexander-pirmasens@web.de>
Subject: [TRNSYS-users] Calculating the PMV and PPD Index with TRNSYS
Dear TRNSYS Community,
I try to calculate the PMV and PPD Index with TRNSYS using the Type 56. Can anyone explain me how I get and where I get the results of the PMV and PPD using Type 56? I have made a 3D Room Model with sketchup and defined all the layers for the building in TRNBuild. Now I want to put in some parameters and depending on them calculating the PMV and PPD. But I don’t know where I get the results vor the PMV and PPD.
I hope someone can help me.
Thank you in advance for your help!
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org