[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Radiators with type 56

Thank you

Le ven. 14 févr. 2020 à 2:41 AM, "최영배" via TRNSYS-users <trnsys-users@lists.onebuilding.org> a écrit :


 Hello


 If you want to input the radiator to your building, there are several ways to try that.


 1. you can apply a radiator model using Type 1231.


 2. you can put "gain" in type 56. This requires a calculation of the heat generation.


 3. Simply assume that the amount of heat in the interior wall.


 Regards

--------- 원본 메일 ---------
보낸사람 : mohamed sarmouk via TRNSYS-use <trnsys-users@lists.onebuilding.org>
받는사람 : TRNSYS users mailing list at O <trnsys-users@lists.onebuilding.org>
참조 : mohamed sarmouk <sarmouk@gmail.com>
받은날짜 : 2020-02-13 (목) 23:01:42
제목 : [TRNSYS-users] Radiators with type 56
Hello,
I want to use radiators to heat my building, i already designed the thermal zones on sketchup Trnsys 3d, then in simulation studio, i did not know how to link radiators to the type 56 building.

Would you please informe me how to do that,
Thank you.

M.SARMOUK

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org