Re: [TRNSYS-users] Contam+Trnsys coupling

On Thu, Feb 6, 2020 at 5:22 PM Dols, William Stuart (Fed) via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:

David,
Thanks for the clarification.
I have posted updates for both 32bit and 64bit versions of Type98.
Hopefully, the file naming doesn’t cause too much confusion.
Type98 DLLs with x64 in their names should be used for 64 bit versions of TRNSYS 18.

- Stuart

From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> On Behalf Of David BRADLEY via TRNSYS-users
Sent: Wednesday, February 5, 2020 9:47 PM
To: Dols, William Stuart (Fed) via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Cc: David BRADLEY <d.bradley@tess-inc.com>
Subject: Re: [TRNSYS-users] Contam+Trnsys coupling

Stu,

Trnsys17 was only available in 32-bit. It wasn't until v18 that a 64-bit version was available.

best,

David

On 02/05/2020 14:35, Dols, William Stuart (Fed) via TRNSYS-users wrote:
Are you using a 32 bit or 64 bit version of TRNSYS 17?

- Stuart

From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> On Behalf Of Obaid via TRNSYS-users
Sent: Wednesday, February 5, 2020 9:36 AM
To: trnsys-users@lists.onebuilding.org
Cc: Obaid <obaidullahya@gmail.com>
Subject: [TRNSYS-users] Contam+Trnsys coupling

Hello,

I created a coupled project with Contam 3.2 and Trnsys 17 but when I run the simulation, it shows this error that may or may not have originated from the model.

message: ((The project path given is longer than the allowed 260 characters by Windows))

Though it says that the length of path for the current project exceeds the maximum limit but it Doesn't.

I also enabled the filesytem's LongPathsEnabled but the error persists.

The files show the same error in another computer too.

What else should I do?

Regards,

Obaid
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
 
http://www.tess-inc.com
http://www.trnsys.com
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org