[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] control a Wall temperature with experimental data



Dear TRNSYS users,

 

I try to do thermal simulations on an experimental platform that was built in my lab. It is a single airnode room. For a specific application, I would like to control the temperature of one wall with some data I got from temperature measurements.

So , to summarize :

-          I measured the inner surface of the wall during a period of time in the experimental platform

-          I want to use this data as an input in TRNSYS to control the temperature of the wall (indoor surface)

 

I don’t really know how to set up this in TRNSYS, as I have the feeling that I must “deactivate” TRNSYS calculation for this wall… Is it even possible to control the inner temperature of a wall ?

 

Thanks in advance for your reply.

 

Best regards

 

 

02. Logo_Corporate_RVB_2

Wirich FREPPEL Ph.D
Development engineer

COSMOS - Buildings Energy Performance & Daylighting Group

TIRET.jpg

SAINT-GOBAIN RESEARCH COMPIEGNE

1 rue de Montluçon • BP 40103 • 60777 Thourotte • France

Tel: +33 637 053 174

E-mail: wirich.freppel@saint-gobain.com

www.saint-gobain.com

 

 

Confidential - Property of Saint-Gobain, the information contained herein are considered confidential.
Their presentation or reproduction is prohibited without the prior written consent of the sender or author.