Hi Huseyin,
You need to add the radiation processor (from Physical phenomena-Radiation processors) and select the suitable component based on the data you have. I guess in your case you have the total horizontal radiation
only known (type 16a).
Hope that is useful!
Thanks,
Fatin
From: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
On Behalf Of Hüseyin Günhan Özcan via TRNSYS-users
Sent: 26 November 2019 14:45
To: trnsys-users@lists.onebuilding.org
Cc: Hüseyin Günhan Özcan <huseyin.ozcan@yasar.edu.tr>
Subject: [TRNSYS-users] About the Type 99
Hi there,
I am currently working on a simulation of solar PV pwered air conditioning system and I want to substitude my own data by user defined Data Reader and Radiation Processor (Type 99) component.
However, I had a problem about this component because I am only measuring the ITILTED (tilted radiation on surface) and I do not know how can I substitude this value to the external file given below.
I hope there is a way for making this step.
Thanks in advance.
Res. Assist. Huseyin Gunhan Ozcan
Yasar Uni. Dept. of Energ. Sys. Eng.
<userdefined>
<longitude> 27.12 ! east of greenwich: negative
<latitude> 38.41 ! İzmir, Turkey
<gmt> 1 ! time shift from GMT, east: positive (hours) - if solar time-> write "solar"
<interval> 1 ! Data file time interval between consecutive lines
<firsttime> 1 ! Time corresponding to first data line (hours)
<var> IBEAM_H <col> 5 <interp> 0 <add> 0 <mult> 1 <samp> -1 !...to get radiation in W/m²
<var> IBEAM_N <col> 0 <interp> 0 <add> 0 <mult> 1 <samp> 0 !...to get radiation in W/m²
<var> IDIFF_H <col> 6 <interp> 0 <add> 0 <mult> 1 <samp> -1 !...to get radiation in W/m²
<var> IGLOB_H <col> 0 <interp> 0 <add> 0 <mult> 1 <samp> 0 !...to get radiation in W/m²
<var> TAMB <col> 3 <interp> 2 <add> 0 <mult> 1 <samp> 0 !...to get °C
<var> RHUM <col> 4 <interp> 1 <add> 0 <mult> 100 <samp> 0 !...to get relative humidity in %
<var> WSPEED <col> 2 <interp> 1 <add> 0 <mult> 1 <samp> 0 !...to get wind speed in m/s
<var> WDIR <col> 1 <interp> 1 <add> 0 <mult> 1 <samp> 0 !...to get wind direction in degree
<var> udef1 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp> 0 !...to get ... in ...
<var> udef2 <col> 0 <interp> 1 <add> 0 <mult> 1 <samp> 0 !...to get ... in ...
<var> udef3 <col> 0 <interp> 1 <add> 0 <mult> 1 <samp> 0 !...to get ... in ...
<var> udef4 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp> 0 !...to get ... in ...
<data>
85.5 5.2 14.3 62.2 0.00E+00 0.00E+00
46.5 2.5 13.7 65.4 0.00E+00 0.00E+00
345.5 2.4 13.2 66.9 0.00E+00 0.00E+00
34.4 5 12.8 68.3 0.00E+00 0.00E+00
11.6 4.8 12.7 68.9 0.00E+00 0.00E+00
356.8 5.7 12.6 69.5 0.00E+00 0.00E+00
97.2 3.8 12.6 68.9 0.00E+00 0.00E+00
81.1 5.1 12.7 68.3 0.00E+00 0.00E+00
26.4 9.6 13.2 66.5 1.44E+02 1.76E+02
27.8 5.8 15.1 57.1 2.04E+02 4.61E+02
144.5 10 16.3 47.4 8.99E+02 5.26E+02
58.9 5.1 17.5 42.9 9.34E+02 6.95E+02
82 4.9 18.3 41.9 8.52E+02 8.53E+02
86.3 4.4 19.4 41.3 1.21E+03 6.77E+02
80.3 4 19.8 41.5 1.40E+03 4.68E+02
97.8 1.4 20.4 40.9 9.58E+02 4.54E+02
351.2 0.9 21.8 39.4 2.93E+02 4.21E+02
343.8 3.9 19.2 48.9 7.31E+00 1.44E+02
358.4 3 17.8 49.2 0.00E+00 0.00E+00
0.2 1.8 15.8 53.7 0.00E+00 0.00E+00
1.6 0.7 15.1 56 0.00E+00 0.00E+00
88.4 0.5 14.5 58.3 0.00E+00 0.00E+00
88.4 0.8 14.2 60.9 0.00E+00 0.00E+00
88.4 0.5 13.4 63.3 0.00E+00 0.00E+00
Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,
Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi
dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.
The information contained in this e-mail and any files transmitted with it are intended solely for the use of the
individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the
contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.
|