I followed TRNSYS example and defined it the same way. But I have two objective functions (Cost and Efficiency, Multi-Objective). and by constraint I mean relation between variables. something like: X+3*Y+Z<10, which can be added to the objective function as penalty. However, when there are man of these constraints, the penalty method is not trustable. X, Y and Z has minimum and maximum amounts, which are determined in TRNOPT.
Regards,
Hoofar
_______________________________________________Hi Leen,
I can define constraints as penalties in TRNOPT. However, defining penalties instead of constraints does not work when there are many of them. TRNOPT does not have the option for specifying constraints.
How can be the constraints defined in TRNSYS file? and What do you mean by adapting optimization function in TRNSYS?
Best regards,
Hoofar
Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> im Auftrag von leen peeters via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Gesendet: Mittwoch, 17. April 2019 21:05:05
An: TRNSYS users mailing list at OneBuilding.org
Cc: leen peeters
Betreff: Re: [TRNSYS-users] TRNOPTHi,
why not defining the constraints and penalties in your TRNSYS file? That is how I do it.multi-objectives is again something I do by adapting my optimisation function in TRNSYSThe last one ... you should try. I have not yet tested that. Genopt calls TRNSYS and then TRNSYS calls EES. If it is possible, you might have to be really careful with the location of your files. Best is to start with a working TRNOPT example. Then add a link to a small routine in EES and build up from there.
Leen
On Wed, 17 Apr 2019 at 20:36, Hemmatabady, Hoofar via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
_______________________________________________Dear all,
I have the following questions regarding optimization procedure in TRNSYS:
1) How can I define optimization constraints in TRNOPT? (a method is using penalty functions but It does not work for me as I have multiple constraints)
2) Is it possible to do Multi-objective optimization in TRNOPT? if yes, how?
3) Some of my optimization variables come from EES to TRNSYS. Can TRNSYS couple with EES and GenOpt simultaneously?
Best regards,
Hoofar
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org