[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Dome Problem



What's the best practice to model a dome as a flat surface? 

On Wednesday, 27 February 2019, Mario González <marioglezx@gmail.com> wrote:
Michele, 

I think that your problem is the geometry. To simulate a building in TRNSYS, you have to modelate flat surfaces.

Regards,
Mario.

 

---------- Forwarded message ----------
From: Michele Vella <michele.vella.15@um.edu.mt>
To: trnsys-users@lists.onebuilding.org
Cc: 
Bcc: 
Date: Wed, 27 Feb 2019 18:00:42 +0100
Subject: [TRNSYS-users] Dome Problem
image.png
Im trying to draw up a church with domes and when opening the idfs it is showing as shown above. Also importing into the trnsys sim template the following deck error is showing:

Warning: A link or connection has not been created between the component Weather data-2 and the component Radiation!
The component Weather data-2 have not enough output (less than 136)!