Michele,
You should move both airnodes to one Zone.
- Open the zone with the airnode you want to move
- Move active airnode to your target zone
- Now you have one zone with several airnodes
To define an airflow between these two zones, you can use Couple (05-Multizone docu)
Best,
Christoph
Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>
Im Auftrag von Michele Vella via TRNSYS-users
Gesendet: Mittwoch, 13. Februar 2019 12:15
An: trnsys-users@lists.onebuilding.org
Cc: Michele Vella <michele.vella.15@um.edu.mt>
Betreff: [TRNSYS-users] Fwd: Multizone coupling
I have 2 zones on top each other but there is no ceiling touching them so i did the 2 touching surfaces as virtual surfaces.The problem is I dont know how to couple them together as when i heat the upper zone it is not effecting the temperature
of the lower zone. When i press couple on the TRN build it just shows up the airnode window.
Regards
Michele Vella