Hi Mohammad,
I’ve been using Type15-3 for my model though it is in TRNSYS17.
Basically I used Elements (an open source) to modify the variables of the weather data (epw. format) such as WB/DB temperature and RH etc, of which you could easily edit any periods of the year. Then, I imported
the modified epw. file into Type15-3 of my TRNSYS model, and it works properly and I’ve validated against the measured weather data as well. I’m not so sure if it is applicable for the case in TRNSYS15, but you might have a try.
Hope it helps..
Best regards,
Siliang
Siliang Yang
PhD Candidate and Casual Academic, UNSW Built Environment
Room 6007, Red Centre West Wing
UNSW AUSTRALIA
UNSW SYDNEY NSW 2052 AUSTRALIA
T:+ 61 (2) 9385 6372 M: 0415 680 589
CRICOS Provider Code 00098G
Follow us:
This email and any attachment(s) transmitted with it are intended solely for the use of the addressee(s) and may contain information that
is confidential or subject to legal privilege. If you receive this email in error, please disregard the contents of the email and attachment(s), delete them and notify the sender immediately. Please note that any copying, distribution or use of this email
is prohibited. Any views expressed in this message are those of the individual sender, except where the sender expressly, and with authority, states them to be the view of The University of New South Wales. Before opening any attachments, please check for
viruses. UNSW ABN 57 195 873 179..
Think Green: Please consider the environment before printing this email.
From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>
On Behalf Of Mohammad Rezvanpour via TRNSYS-users
Sent: Tuesday, 22 January 2019 6:43 PM
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>; David BRADLEY <d.bradley@tess-inc.com>
Cc: Mohammad Rezvanpour <moh.rzv@gmail.com>
Subject: [TRNSYS-users] Weather data
Dear all,
I want to simulate a photovoltaic panel, and I need weather data for Nov-Dec 2018. However, I could not find any TYPE to enter temperatures there or use updated data. It should be noted that my TRNSYS version is 15.
How can I have updated temperature data or simply put the temperatures manually which I got from the Internet?
Best,
Mohammad
--
Regards.
M.Sc. student of Energy and Environmental Engineering at University of Tehran
Hand-Phone: +989303037373
University Email account:
m.rezvanpour@ut.ac.ir