Re: [TRNSYS-users] (no subject)

[David BRADLEY <d.bradley@tess-inc.com>]

Berkane Ahlem,

  I am not clear whether you are asking about how to obtain those values from a simulation that you are running or how you can estimate those values in order to set them in a simulation that you plan to run. If it has to do with getting those results out of a simulation then have a look at Type55. It is an integrator but it can also report minimum and maximum values as well as average values over user-defined time periods.

kind regards,

 David

On 12/09/2018 06:38, berkane ahlem via TRNSYS-users wrote:

Hello sirs,

 How can  i calculate or estimate  the yearly average ground load (qy), the highest monthly ground load (qm), and the peak hourly load (qh). The corresponding durations are usu-ally 10 years, one month, and six hours. And effective gound thermal resistance R10y, R1m , and R6h represent effective ground thermal resistances for 10 years, one month, and six hours thermal pulses

Thank you

Best regards

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com