[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS-users Digest, Vol 167, Issue 22

Dear Madam or Sir,

I hope all is well.

I have the new questions between old 2D simulation and current 3D simulation (TRNSYS3D):

1) after I imported *idf file to simulation studio, the link between Radiation Equation and Type56 is lack of many inputs and outputs, see below pictures. Furthermore, I cannot also Define new inputs from TRNBuild e.g. IT N 180 90, IT S 0 90 etc. Thus, I cannot use TRNSYS 3D model to repeat/simulate my previous project.
How to deal with this problem? Super thanks

Br.

Yang

image.png 2D model
image.png3D model
image.pngTRNBuild Settings for Inputs

<trnsys-users-request@lists.onebuilding.org> 于2018年11月24日周六 上午5:22写道：
Send TRNSYS-users mailing list submissions to
        trnsys-users@lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

or, via email, send a message with subject or body 'help' to
        trnsys-users-request@lists.onebuilding.org

You can reach the person managing the list at
        trnsys-users-owner@lists.onebuilding.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:

   1. Re: QTSABS vs QSOLTR (Karol Bandurski)



---------- Forwarded message ----------
From: Karol Bandurski <karol.bandurski@put.poznan.pl>
To: "'hotline'" <hotline@transsolar.com>, "'TRNSYS users mailing list at OneBuilding.org'" <trnsys-users@lists.onebuilding.org>
Cc: 
Bcc: 
Date: Fri, 23 Nov 2018 09:39:10 +0100
Subject: Re: [TRNSYS-users] QTSABS vs QSOLTR

Dear Christoph,

 

Thank you for your response!

 

The problem is that, it seems to me, that I don’t have internal shading, so QSOLTR should equal QTSABS. Am I right?

 

How should I set window type and external devices to get QSOLTR=QTSABS?

 

Kind regards,
Karol

 

From: hotline [mailto:hotline@Transsolar.com]
Sent: Thursday, November 22, 2018 4:57 PM
To: TRNSYS users mailing list at OneBuilding.org
Subject: Re: [TRNSYS-users] QTSABS vs QSOLTR

 

Dear Karol,

 

QSOLTR is the total shortwave solar radiation transmitted through external windows and internal shading.

QTSABS also includes the secondary heat flux which includes the convection of internal shader.

 

Hope that clarifies your energy balance a bit.

 

Best,

Christoph

 

Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> Im Auftrag von Karol Bandurski via TRNSYS-users
Gesendet: Mittwoch, 21. November 2018 16:42
An: trnsys-users@lists.onebuilding.org
Cc: Karol Bandurski <karol.bandurski@put.poznan.pl>
Betreff: [TRNSYS-users] QTSABS vs QSOLTR

 

Dear All,

 

I am going to find whole solar gain which come to zone throug windows.

There are two outputs that I consider: QTSABS and QSOLTR.

 

It seems to me that bigger should be QSOLTR, because it is shortwave radiation transmitted through window (but not kept 100% in air node).

The QTSABS is what exactly has been kept - has been absorbed by inside surfaces.

But it is appear that QTSABS > QSOLTR…

 

Could you write me what is right interpretation of those outputs?

 

Kind regards,
Karol

 

--------------------------------------------------------------------

Karol BANDURSKI M. Sc.

Faculty of Civil and Environemntal Engeneering

Division of Heating, Air Conditioning and Air Protection

Poznan University of Technology

https://www.researchgate.net/profile/Karol_Bandurski

www.put.poznan.pl/~karol.bandurski

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org