Send TRNSYS-users mailing list submissions to
trnsys-users@lists.onebuilding.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org
or, via email, send a message with subject or body 'help' to
trnsys-users-request@lists.onebuilding.org
You can reach the person managing the list at
trnsys-users-owner@lists.onebuilding.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:
1. Re: TRNSYS-users Digest, Vol 160, Issue 39 (foziarao)
2. Re: output online plotter variable (David BRADLEY)
3. TRNSYS Workshops at eSim 2018, Montr?al, QC - in just 2
weeks! (Micha?l Kummert)
4. Re: Unspecified error in Type 557b (Jeff Thornton)
---------- Forwarded message ----------
From: foziarao <foziarao@gmail.com>
To: trnsys-users@lists.onebuilding.org
Cc:
Bcc:
Date: Thu, 26 Apr 2018 19:42:22 +0500
Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 160, Issue 39
Achinta,
Use 10,10 on both axis with same maximum n minimum limits on both axes for comparison , and increse plotters , e.g use one plotter for temperature only and link all temperature with it, n other one for humidity only for all humidities.
Regards,
trnsys-users-request@lists.onebuilding.org wrote:Dear Sir/Madam,kindly let me know, what is the maximum value of axis variable we can set in online output plotter for getting results in TRNSYS17.in my system i can set maximum variable 10 but i need more than 10 variable. kindly give any suggestion.for your kind information i have attached the screenshot, where i am facing problem.thank you for your valuable time.--Achinta
---------- Forwarded message ----------
From: David BRADLEY <d.bradley@tess-inc.com>
To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>
Cc:
Bcc:
Date: Thu, 26 Apr 2018 09:59:27 -0500
Subject: Re: [TRNSYS-users] output online plotter variable
Achinta,
You can plot up to 10 variables on the left axis and 10 on the right axis (for a total of 20 per plot). If you need more than that you can use up to 10 instances of Type65 in a simulation. They will appear as tabs along the bottom of the plot window.
kind regards,
David
On 04/26/2018 05:23, achinta das via TRNSYS-users wrote:
Dear Sir/Madam,kindly let me know, what is the maximum value of axis variable we can set in online output plotter for getting results in TRNSYS17.in my system i can set maximum variable 10 but i need more than 10 variable. kindly give any suggestion.for your kind information i have attached the screenshot, where i am facing problem.thank you for your valuable time.
--
Achinta
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists. onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com
---------- Forwarded message ----------
From: "Michaël Kummert" <michael.kummert@gmail.com>
To: "'TRNSYS users mailing list at OneBuilding.org'" <trnsys-users@lists.onebuilding.org>
Cc:
Bcc:
Date: Thu, 26 Apr 2018 11:24:41 -0400
Subject: [TRNSYS-users] TRNSYS Workshops at eSim 2018, Montréal, QC - in just 2 weeks!There will be 3 TRNSYS workshops before/after eSim 2018, the IBPSA-Canada conference (May 8-11, Montréal, QC).
Note that even though the first workshop was first announced as an introductory one, its contents will be adapted to the participants. In particular the second half of the workshop will focus on more advanced features such as writing new components (there are still no prerequisites).
May 8, 8:30 – 12:30: Introduction to TRNSYS 18 and advanced features
Introduction to the software with a focus of new capabilities in TRNSYS 18. Advanced notions such as writing new components will be covered during the second half of the workshop.
Instructor: Angela Weiss / Dave Bradley, TESS
May 8, 13:30 – 17:30: TRNSYS for optimization and Model-Predictive Control with Matlab and GenOpt
Comparison of different approaches to optimize building and system design in TRNSYS with GenOpt or using Matlab as a pre- and post-processor. Comparison of different approaches to implement MPC in TRNSYS in two distinct cases: using TRNSYS as the controller model for simulation or real-time implementation, and using TRNSYS as the reference model to investigate MPC using models and control algorithms implemented in Matlab through Type 155.
Instructors: Michaël Kummert and Kun Zhang, Polytechnique Montréal
May 11, 8:30 – 12:30: Modelling and simulating Ground-Source Heat Pump Systems using TRNSYS
Practical workshop on modelling of ground-source heat pump systems covering borehole heat transfer and heat pump modelling as well as complete system models (bore field, heat pump, building).
Instructor : Michel Bernier, Polytechnique Montréal
For more information and registration: http://esim2018.etsmtl.ca/ (“Workshops” link at the top).
---
Michaël Kummert
Polytechnique Montréal
eSim 2018 Scientific Chair
---------- Forwarded message ----------
From: Jeff Thornton <thornton@tess-inc.com>
To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>
Cc:
Bcc:
Date: Thu, 26 Apr 2018 15:13:42 -0500
Subject: Re: [TRNSYS-users] Unspecified error in Type 557b
Prasanth,
Set the number of simulation years to 10 (Parameter 28). You are hitting the mesh boundary limit by setting it to one year and then running a 10-year simulation.
Jeff
---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
On 04/25/2018 7:53 am, Prasanth Subramani via TRNSYS-users wrote:
Hello TRNSYS user,
I am using type 557b (Vertical Borehole Heat Exchanger) for my TRNSYS
simulation. I have encountered unspecified error between simulation, for
which the cause is unknown. Can someone help me in these regards? I have
seen that many people encountered this problem, but I couldn't find the
solution in the user forum. I also attached simple Simulation model with
constant heat extraction (10kW) from the soil. In this model, the error
occurs at 83426.164 hours. In case of more heat extraction, it occurs
earlier. For example (at 13225.5 hour 100kW heat extraction).
The error message is shown below.
*** Fatal Error at time : 83426.166667
Generated by Unit : 40
Generated by Type : 557
TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an
inconsistency in the specified component between the input file and the
information expected by the Type
Reported information: The component model has reported an unspecified
error. Please check the input file for possible sources of error.
Can anyone explain to me why it happens or what is the solution? Thanks
in advance.
Regards
Prasanth
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebu ilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org