Re: [TRNSYS-users] PVT not showing considerable output temperature

[Jeff Thornton <thornton@tess-inc.com>]

Jibi - is it possible you have a very large flow rate such that there is a negligible temperature rise across the collector.  If that’s not it I suggest you attach your trnsys project (if it’s version 17 or later) and we can take a look at it.

Jeff - TESS

Sent from my iPhone

On May 15, 2018, at 9:43 PM, Jibi Jais (지비 제이즈) via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:

Hi

I have used the PVT solar collector (type 563) for Seoul climate.

I do not see any temperature increase in the collector fluid outlet temperature (20~25 C) compared to the inlet temperature! I used TMY2 data and have checked the radiation inputs also.

Do you have any suggestions?

Thank you

Jibi

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org