<I model a heat pump system and i create input data file for heating and i change the parameter 7 and 8 the problem is the simulation doesn't run
Please find the attached of data file>
Your data file has 4 identical temperatures in the first line - that makes it kind of hard to do interpolation between data points. Put in one data point if you only have one data point and change the corresponding parameter. The other thing I noticed is that you have to specify (N_Sources * n_loads) data points - which you did not do. Also when you write in, please let us know which model you are using.
Jeff
---
Jeff Thornton President - TESS LLC 22 N. Carroll Street, Madison WI USA 53703 Office: (608) 274-2577 Fax: (608) 278-1475 www.tess-inc.com E-Mail: thornton@tess-inc.com
On 05/07/2018 4:39 pm, berkane ahlem via TRNSYS-users wrote:
Hello sirs,
I model a heat pump system and i create input data file for heating and i change the parameter 7 and 8 the problem is the simulation doesn't run
Please find the attached of data file
Thank you
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org