BEN Description:
The Balanced Energy Networks (BEN) project at LSBU brings together cross-sector supply chains to deliver integrated energy solutions at different scales to fulfil the energy systems challenges of achieving a low-carbon economy. http://www.lsbu.ac.uk/research/centres-groups/sites/ben-project
Activities and objectives:
The post-holder will be responsible for exploring how to transfer and distribute energy within BEN system in an intelligent way from heat pump or energy storage tank to buildings; and from one building to another building etc. BEN constraints will be investigated combining with existing BEN and TRNSYS models through programming language Fortran, C++ etc.
The software packages TRNSYS, Matlab/Simulink are to be applied to the development of BEN whole system control, operation and optimization.
Essential knowledge and requirements:
Applicants should be keen on programming with TRNSYS (Borehole, Heat Pump, Storage Tank, Building Services), Fortran and Matlab/Simulink. Candidates should be able to demonstrate advanced experience and skills in creating own TRNSYS 17 components using a Fortran or C++ compiler. A basic knowledge of thermodynamics, heat transfer theory as well as control theory will be helpful in achieving the above-defined objectives in a time-efficient manner.
Location: London
Hours: Full Time
Contract Type: Fixed-Term/Contract
Contact: Dr. Yang Wang; wangy47@lsbu.ac.uk
Send TRNSYS-users mailing list submissions to
trnsys-users@lists.onebuilding.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org
or, via email, send a message with subject or body 'help' to
trnsys-users-request@lists.onebuilding.org
You can reach the person managing the list at
trnsys-users-owner@lists.onebuilding.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:
1. Re: Evaporation rate from wet garments (Angel Carrera)
2. Re: active layer (Marion Hiller)
3. Re: active layer (Marion Hiller)
---------- 已转发邮件 ----------
From: Angel Carrera <angel.carrera@aiguasol.coop>
To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>
Cc: Antoine Gautier <antoine.gautier@solamen.fr>
Bcc:
Date: Mon, 19 Feb 2018 10:21:26 +0100
Subject: Re: [TRNSYS-users] Evaporation rate from wet garmentsAntoine,I usually refer to the annex 14 sourcebook from ebcs, free available online, good luckAngelEl dia 16/02/2018 14.01, "Antoine Gautier via TRNSYS-users" <trnsys-users@lists.onebuilding.org > va escriure:Dear users
We are currently involved in the design of touristic barges with panoramic glazing.
To assess the condensation risk, the client asks us to consider a worst case scenario consisting in a rainy day with passengers wearing wet clothes.
Do you know any model or conservative approach to assess the corresponding latent gains? (Managing my expectations I did not ask for any standard…)
Any insight into that matter will also be welcome.
Thanks a lot for your help.
Best
--
Antoine Gautier
Solamen
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebu ilding.org
---------- 已转发邮件 ----------
From: Marion Hiller <Hiller@transsolar.com>
To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>, "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Cc: Karol BANDURSKI <karol.bandurski@put.poznan.pl>
Bcc:
Date: Mon, 19 Feb 2018 12:03:33 +0000
Subject: Re: [TRNSYS-users] active layer
Karol,
did you define the ceiling containing the TAB as ADJACENT surface between the two airnodes?
If yes, NType 58 should give the same result no matter which airnode /surfaceID is selected.
If you can’t detect any other error (like looking at a wrong output…) you may send your project to (hotline@transsolar.com).
Marion
------------------------------
------------------------------ ------------------------------ ------------------------------ ------------------------------ ----- Dipl.-Ing. Marion Hiller
TRANSSOLAR Energietechnik GmbH
Stuttgart - Munich - New York - Parist: +49.711.67976.0 f: +49.711.67976.11
www.transsolar.com/
KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 StuttgartAmtsgericht Stuttgart - HRB 23347 / Steuernummer: 99073/00911 / USt-IdNr.: DE 152272639
Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Von: TRNSYS-users [mailto:trnsys-users-bounces@
lists.onebuilding.org ] Im Auftrag von Karol BANDURSKI via TRNSYS-users
Gesendet: Samstag, 17. Februar 2018 00:46
An: trnsys-users@cae.wisc.edu
Cc: Karol BANDURSKI <karol.bandurski@put.poznan.pl>
Betreff: [TRNSYS-users] active layer
Dear All
I model thermal active building system. My ceiling is between two zones.
When I ask TRNBuild for outlet temperature from active layer -TOFL (NType 58) – I can do it choosing upper or lower zone of the ceiling.
Why do I get different values for this two outputs? If I understand: they both related to the same ceiling and the same pipes…
Regards,
Karol
------------------------------
------------------------------ -------- Karol BANDURSKI M. Sc.
Faculty of Civil and Environemntal Engeneering
Division of Heating, Air Conditioning and Air Protection
Poznan University of Technology
www.put.poznan.pl/~karol. bandurski
https://www.researchgate.net/
profile/Karol_Bandurski
---------- 已转发邮件 ----------
From: Marion Hiller <Hiller@transsolar.com>
To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>, "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Cc: Karol BANDURSKI <karol.bandurski@put.poznan.pl>
Bcc:
Date: Mon, 19 Feb 2018 12:03:33 +0000
Subject: Re: [TRNSYS-users] active layer
Karol,
did you define the ceiling containing the TAB as ADJACENT surface between the two airnodes?
If yes, NType 58 should give the same result no matter which airnode /surfaceID is selected.
If you can’t detect any other error (like looking at a wrong output…) you may send your project to (hotline@transsolar.com).
Marion
------------------------------
------------------------------ ------------------------------ ------------------------------ ------------------------------ ----- Dipl.-Ing. Marion Hiller
TRANSSOLAR Energietechnik GmbH
Stuttgart - Munich - New York - Parist: +49.711.67976.0 f: +49.711.67976.11
www.transsolar.com/
KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 StuttgartAmtsgericht Stuttgart - HRB 23347 / Steuernummer: 99073/00911 / USt-IdNr.: DE 152272639
Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Von: TRNSYS-users [mailto:trnsys-users-bounces@
lists.onebuilding.org ] Im Auftrag von Karol BANDURSKI via TRNSYS-users
Gesendet: Samstag, 17. Februar 2018 00:46
An: trnsys-users@cae.wisc.edu
Cc: Karol BANDURSKI <karol.bandurski@put.poznan.pl>
Betreff: [TRNSYS-users] active layer
Dear All
I model thermal active building system. My ceiling is between two zones.
When I ask TRNBuild for outlet temperature from active layer -TOFL (NType 58) – I can do it choosing upper or lower zone of the ceiling.
Why do I get different values for this two outputs? If I understand: they both related to the same ceiling and the same pipes…
Regards,
Karol
------------------------------
------------------------------ -------- Karol BANDURSKI M. Sc.
Faculty of Civil and Environemntal Engeneering
Division of Heating, Air Conditioning and Air Protection
Poznan University of Technology
www.put.poznan.pl/~karol. bandurski
https://www.researchgate.net/
profile/Karol_Bandurski
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org