Good morning Marie-Hélène,
From my experience, the “Replace” option sometimes leads to some problems. Check carefully all the parameters of the type. Be sure that their value are correct. Check particularly the
first parameter, the File Type. If it is still the one for reading TM2 files, it means that the Replace option is not working for weather data file I think. In this case, you will have to create a new Type 15-3, and link it again with your building. I know
that if you have many surfaces it may be long, but at least like this, your are sure that it will work.
I hope it helps,
|
|
Hélène THIEBLEMONT Ingénierie efficience énergétique 03 45 21 51 78 Groupe ELITHIS 1C Boulevard de Champagne
BP 41 249 – 21012 Dijon Cedex 03 80 43 52 02 |
De : TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
De la part de Marie-Hélène via TRNSYS-users
Envoyé : mardi 5 décembre 2017 20:57
À : trnsys-users@lists.onebuilding.org
Cc : Marie-Hélène <mariehtalbot@gmail.com>
Objet : [TRNSYS-users] TRNSYS 18 - Type 15-3 problem (using .epw weather file)
Dear users,
I have created a Multizone Building Project from a idf file. I wanted to change the weather file to read a .epw file. So I right click on the Weather data (by default it's Type 15-6 that reads TM2 file) and Replace with it Type 15-3.
When I run the project, I have this error:
Am I doing something wrong ?
Thank you,
Marie-Hélène Talbot | Étudiante
à la maîtrise
Énergies renouvelables et efficacité énergétique
Département de génie de la construction
École de technologie supérieure