Re: [TRNSYS-users] Sketchup pro and TRNSYS

[David BRADLEY <d.bradley@tess-inc.com>]

Alvaro,

  It is hard to know what might be happening. The behavior that you describe is certainly not "normal"

  The reason the other versions of SketchUp do not work is that you need to make sure that the Trnsys3d plugin installer matches your version of SketchUp. If you need a plugin installer for a different version of SketchUp please contact your TRNSYS distributor.

  I do not know if this will solve the problem but the two most important things to remember about Trnsys3d are as follows:

  1. When you draw items in the plugin make certain that you have a thermal zone selected and activated. You can tell a zone is active because the color of the other zones will look faded and there will be a dotted box showing the extents of the active zone.

  3. when you save, make sure that you use the plugin's "save" tool and not SketchUp's save.

kind regards,

 David

On 12/01/2017 09:13, alvaro guillermo valenzuela via TRNSYS-users wrote:

Hello, I have a problem with the tool of TRNSYS in Sketchup  every time when i close a project and later i open it again the program shows a lot of new thermal zones and with different names and  also disappear some walls. what i can do ?. I use TRNSYS 17 and Sketchup 2014 because the others version doesn’t  work.

 

King regards

--

Alvaro Valenzuela Escalona

Estudiante Ingeniería civil Mecánica

Universidad Técnica Federico Santa María

+56-989221038 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com