[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] help
Hi Saeed,
We have used the STEC model for the heliostat field. The field efficiency matrix is a map of the efficiency for your heliostat field for pairs of solar zenith and azimuth angle. The model requires you to know what the average efficiency of the entire field is for a range of solar angles. Do you have any measured data from the heliostat field you are modelling? If not you must make an assumption. See the default file to see how the data is arranged.
Kind regards,
Alastair
Alastair McDowell
Engineering Consultant
EnergyAE - Enabling innovation for a sustainable future
T: +61 2 8003 4323 | M: +61 420 814 623 | E: alastair.mcdowell@energyae.com
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com
-----Original Message-----
From: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] On Behalf Of saeed.farid via TRNSYS-users
Sent: Monday, November 27, 2017 8:34 PM
To: trnsys-users@lists.onebuilding.org
Cc: saeed.farid <sss.ffb71@yahoo.com>
Subject: [TRNSYS-users] help
hello every one
i hope you are fine
i have some question about heliostat and solar tower modeling in trnsys and i would be thankful if you help me.
1-how can i get heliostat field efficency matrix i mean a file like "matr02.dat"file in trnsys STEC example for heliostat field ??...can i get that from a software or i have to get that myself manually?if i can get from a software which software is sutable do you think?
2-how can i get file for insoulation in analysis i mean a file like "BRST84.dat" in trnsys STEC example.??
thankyou for your help
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org