[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] trnsys3d for 17 and 18



Dear David and Adnan,

 

if you are using the newest version of TRNSYS3d and you want to import the .idf file into TRNSYS17, you must use this template:

NewFileTemplate_Trnsys17.idf

 

Best
Jakob

__________________________________________________________________________________________________

 

Jakob Merk M.Sc.

 

Transsolar Energietechnik GmbH

Curiestraße 2

70563 Stuttgart

http://www.transsolar.com

Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden

Stuttgart – München – New York – Paris

Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle

Eingetragen beim Amtsgericht Stuttgart HRB 23347,

Steuernummer: 99073/00911,USt-IdNr.: DE 152272639

 

 

 

Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von David BRADLEY via TRNSYS-users
Gesendet: 31 October 2017 14:55
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Cc: David BRADLEY <d.bradley@tess-inc.com>
Betreff: Re: [TRNSYS-users] trnsys3d for 17 and 18

 

Adnan,

  If I understand the problem the same *.idf file can be imported into Trnsys18's TRNBuild but not into Trnsys17's TRNBuild? To my knowledge, the Trnsys3d plugin should work for either Trnsys version. Someone please correct me if I am wrong about that!

  I would suggest that you send the *.idf file to your distributor and see if they can give you some assistance.

kind regards,

 David

 

 

On 10/29/2017 21:05, adnan rasheed via TRNSYS-users wrote:

Hello all,

 

i have both TRNSYS 17 and 18 installed in my computer. but right now i am working on TRNSYS 17. my problem is after installing TRNSYS 18 my google sketchup's plugin Trans3d is not working for TRNSYS 17 but workiing perfect with TRNSYS 18. i think file is updated. for now i need to use TRNSYS 17. how can i solve this problem. when i import idf file in 17 it shows empty file but when i import into 18 it works well.

 

 

Regards

 

Adnan rasheed.




_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
 
http://www.tess-inc.com
http://www.trnsys.com