|
Dear Shohei, in the mulitzone building model Type 56, there are two models for humidity absorption. The first model is an effective moisture capacitance which is defined as the product of the air mass and a moisture capacitance ratio. The second model describes a separate humidity buffer divided into a surface and a deep storage. Please check out chapter 5.4.3 of the manual. Best __________________________________________________________________________________________________ Jakob Merk M.Sc. Transsolar Energietechnik GmbH Curiestraße 2 70563 Stuttgart Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in
Gebäuden Stuttgart – München – New York – Paris
Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle Eingetragen beim Amtsgericht Stuttgart HRB 23347,
Steuernummer: 99073/00911,USt-IdNr.: DE 152272639 Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Shohei HONTA via TRNSYS-users Dear all, I would like to simulate humidity calculation including moisture absorption and release. Is this possible with TRNSYS? Are there any necessary components? Regards, Shohei -- Shohei HONTA Master's Student Dept. of Architecture and Building Science, Graduate School of Engineering,Tohoku University Laboratory of Building Environmental Engineering Sustainable Environment Creation #1201 6-6-11 Aoba, Aramaki-Aza, Aoba-ku, Sendai 980-8579, JAPAN TEL : +81 22-795-7885 FAX : +81 22-795-7886 E-mail :
honta@sabine.pln.archi.tohoku.ac.jp |