[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS - errors



Pady -

There is an error prior to the two that you have included here and it indicates that you have the wrong number of parameters specified for Type60.

Regards,

Tim

 

---
Timothy P. McDowell Executive Vice President Thermal Energy System Specialists, LLC 22 N Carroll St, Suite 370 Madison, WI 53703 office: 608-274-2577 cell: 608-225-5250

On 2017-09-25 17:04, Padmanabhan Iyer via TRNSYS-users wrote:

Hi Team,
 
I am getting an error message as below:
 
Fatal Error at time   :         1.000000
Generated by Unit     :    21
Generated by Type     :    31
TRNSYS Message    468 : The getStaticArrayValue function was called with an index greater than that specified for the total number of dynamic variables in the SetNumberStoredVariables subroutine call. Please check the formulation of the specified TYPE, rebuild the dynamic link library and re-run the simulation.
Reported information  : Not available
 
Fatal Error at time   :         1.000000
Generated by Unit     :    34
Generated by Type     :     2
TRNSYS Message    134 : The current Unit has tried to access a Output value higher than the number of outputs for the Type.
Reported information  : Not available
 
I have attached the .dck file and list file for your reference.
 
Any help would be much appreciated.
 
Thanks,
Pady
 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org