Dear D.A. Shah,
I’m not aware that TRNSYS is able to perform a ray-tracing in such a general way as SOLTRACE.
Unfortunately, I don’t know SOLTRACE in detail, but it seems to me that using the output of SOLTRACE is a promising way.
Marion
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Dipl.-Ing. Marion Hiller
TRANSSOLAR Energietechnik GmbH
Stuttgart - Munich - New York - Paris
t:
+49.711.67976.0 f:
+49.711.67976.11
www.transsolar.com/
KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart
Amtsgericht Stuttgart - HRB 23347
/ Steuernummer: 99073/00911 / USt-IdNr.: DE 152272639
Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Ismael Rodriguez Cal via TRNSYS-users
Gesendet: Dienstag, 12. September 2017 09:48
An: Devang Shah <devang.shah@paruluniversity.ac.in>; TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Betreff: Re: [TRNSYS-users] Fwd: Capacity comparison of SOLTRACE AND TRNSYS
Dear D.A. Shah,
I was wondering the same, because I need to model a kind of reflector that reflects, but also absorbs and redirects light onto a set of PV panels. I need to model the building
as well with type 56.
As far as I know, TRNSYS is not able to perform ray tracing analysis. So this effect should be included in any other way I guess.
Do you have any idea? Or are you planning to couple Solar Trace with TRNSYS (maybe using Solar Trace outputs in text format as an input for TRNSYS?)
Maybe this will help:
http://www.reiner-lemoine-stiftung.de/pdf/dissertationen/1Diss_Hess_Final_view_sh.pdf
(Check page 114, fig 4.1)
Please let me know if you solve the problem in TRNSYS...
Best,
T
De: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> en nombre
de Devang Shah via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Enviado: lunes, 4 de septiembre de 2017 15:17
Para: trnsys-users@lists.onebuilding.org
Asunto: [TRNSYS-users] Fwd: Capacity comparison of SOLTRACE AND TRNSYS
Dear Sir/Madam,
I have got a querry....
I am going to use SOLTRACE(RAY TRACING SOFTWARE BY NREL https://www.nrel.gov/csp/soltrace.html ) software for evaluation of
performance of various TYPES of solar reflectors.
|
www.nrel.gov SolTrace. SolTrace is a software tool developed at the National Renewable Energy Laboratory (NREL) to model concentrating
solar power (CSP) systems and ... |
Now I want to know that whether TRNSYS can be used for the same purpose?
Can i evaluate optical performance of solar reflectors with TRNSYS software like SOLTRACE(RAY TRACING SOFTWARE BY NREL)?
PLEASE THROW SOME LIGHT ON THIS AS I WANT TO DECIDE THAT IF TRNSYS IS CAPABLE OF MODELLING SOLAR REFLECTORS THEN I SHOULD NOT WASTE TIME IN LEARNING SOLTRACE AND FOCUS ON TRANSYS..
AWAITING YOUR REPLY,
THANKING YOU,
--
Very Truly Yours,
D.A. Shah,
Asst. Professor,
Civil Engg. Dept.,
Parul Institute of Technology,
Faculty of Tech. & Engg.,
Parul University.
--
Very Truly Yours,
D.A. Shah,
Asst. Professor,
Civil Engg. Dept.,
Parul Institute of Technology,
Faculty of Tech. & Engg.,
Parul University.