Re: [TRNSYS-users] Problem with heat pump Type 505 cooling and heating performance data

[David BRADLEY via TRNSYS-users <trnsys-users@lists.onebuilding.org>]

Usually the catalogs report total flow and do not separate out by return or outside air because the return and outside air streams mix before going through the heat pump.

It doesn't matter if your catalog has more or fewer values than the example data file. The model's parameters allow you to adjust the number of values of each variable that you are supplying in your data file.

kind regards,

 David

On 07/01/2017 06:59, S.O.Daei.N via TRNSYS-users wrote:

Hi All,

As mentioned in catalog in attachment, I have specification data of my heat pump.

I have total flow rate of 944 l/s (but i don't have return and outside air flow rates separately how can i find them?), and liquid flow rate 0.354 l/s and DHW flow rate 0.14 l/s (one fewer than mentioned in sample catalog data) , but in catalog i have 12 values for 4 temperature in cooling mode and 12 values for 4 temperature in heating mode.

In sample catalog data i need 24 values,how can i reach that other 12 values in both heating and cooling mode in that catalog data?
Please help me with this problem
Thanks

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com