|
Dar Niket, as mentioned in the name, this heating type is ideal and cannot deal with minimum heating powers. You could use internal gains instead and control them with Type2… Best __________________________________________________________________________________________________ Jakob Merk M.Sc. Transsolar Energietechnik GmbH Curiestraße 2 70563 Stuttgart Telefon: +49 711 67976-0 Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in
Gebäuden Stuttgart – München – New York – Paris
Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle Eingetragen beim Amtsgericht Stuttgart HRB 23347,
Steuernummer: 99073/00911,USt-IdNr.: DE 152272639 Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Niket Kumar via TRNSYS-users Dear All, I am trying to see the power consumption of heating system in my model and for this I am using Heating Type Manager for a zone in TRNBuild. The Heating Type Manager has options of set temperature and heating power (which is limited to say 7200 KJ/h in my case). As of now, When I am switching on the heating system for the zone and seeing 1 min interval sensible heating energy
demand, It is coming variable and power consumption is gradually increasing or decreasing. But in actual case the heating system is such that it works only at its fullest (i.e. 7200 KJ/h), so either it is consuming 7200 or no consumption. So, Ideally this should be the way my model should be behaving, but its not the case here. Can anyone please suggest me how can I do this? Thanking you, regards, Niket Kumar |