To whom it may concern, I’m finding some difficulties for TRNSYS code debugging using MVS2005. I was able to build TRNSYS .dll using MVS compiler and launch TRNExe.exe through compiler (Debug>Start without debugging) following the instructions from TRNSYS manual 8 – Programmers guide (section 8.5.33.3). Now I’m struggling trying to do line to line debugging using MVS compiler. Since I’m planning to develop some new components, I would like firstly being able to understand how calculations are performed by doing compiler line by line debugging (using breakpoints and so on). However I’m facing unexpected problem when going for debugging, basically error message says: Debugging information for ‘TRNExe.exe’ cannot be found or does not match. Binary was not built with debug information. However when trying start without debugging from compiler, TRNExe.exe is launched and asking for .dck file, so I cannot really understand what is going wrong. I would really appreciate getting any hint on that, Kind Regards Miguel --------------------------------------------------- Dr. Miguel Ángel Reyes Belmonte IMDEA ENERGY Institute Avda. Ramón de la Sagra, 3 Parque Tecnológico de Móstoles E-28935 Móstoles, Madrid, Spain Telf.: +34 91 737 1150 e-mail: miguelangel.reyes@imdea.org web: http://www.energy.imdea.org https://es.linkedin.com/pub/miguel-angel-reyes/7b/347/b77 orcid.org/0000-0002-9666-2388 |