Ahmad,
There are literally hundreds of ways to control the temperature and humidity in a space. I would suggest you do some reading to figure out a common HVAC system given your climate and type of building - then you can begin to replicate that system in TRNSYS.
Jeff
---
Jeff Thornton President - TESS LLC 22 N. Carroll Street, Madison WI USA 53703 Office: (608) 274-2577 Fax: (608) 278-1475 www.tess-inc.com E-Mail: thornton@tess-inc.com
On 02/07/2017 12:08 pm, ahmad abbasian via TRNSYS-users wrote:
Hello
I'm simulating a solar assisted coolig system for a building. The building cooling load is transient. so how the HVAC system should be controlled to cover the building load? I guess that the supply air temperature and humidity ratio should be constant ( a value in the comfort region ) and the air flow rate should be controlled using a variable speed fan to cover the cooling load. Is it right? any better idea?
Also I don't know how the control system should be? should I use a thermostat?
If any one can send me an example it will be very useful for me to learn
Thank you
..............................................................................................Ahmad abbasianzadehmaster of energy systems engineeringSolar energy ResearcherHarrisburg, Pensylvania
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org