Send me the tank data file and the project and we'll take a look at it.
Jeff
---
Jeff Thornton President - TESS LLC 22 N. Carroll Street, Madison WI USA 53703 Office: (608) 274-2577 Fax: (608) 278-1475 www.tess-inc.com E-Mail: thornton@tess-inc.com
On 01/24/2017 3:36 am, Jobard, Xavier via TRNSYS-users wrote:
Dear TRNSYS users,
I am having problems with Type 534 with plug in. The plug in seems to work correctly. It however outputs an message when closed: "Problem reading cycle number iteration".
Second problem, The application TRNEXE is ended with the error message shown in the Figure enclosed.
In the list file 3 errors are listed:
Error
0
20
534
Message : The storage tank model was unable to read the parameter values from the supplied data file. Please check the location and format of this data file carefully.
Error
0
0
534
TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file Reported information : Reported by LinkCk
Error
0
6
2
TRNSYS Message 134 : The current Unit has tried to access a Output value higher than the number of outputs for the Type. Reported information : Not available
I believe the last two are a consequence of the first one. The file containing the parameter for type 534 is correctly located and I believe that its format is also correct.
Can somebody help? if needed I can send the deck and list file.
Best regards
Xavier Jobard
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org