[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] U-Value



Hi everyone, 

i want to ask one question

1- i prepared new window type (using Window software) and import it into TRNSYS. I want to see changing behavior the overall heat transfer coefficient (U-value) of the new glazing material added

by changing inside and outside temp difference like delta T = 10, 20, 30 ,40,and 50). i am using this equation to calculate U = Q / A( T)  where t is difference of inside temperature and ambient 

temp. i am using type 56 for the simple building structure. my results are very small change in u-value. and simulation results doesn't satisfied the experimental results.

2- i am using type 2 energy demand for heating and cooling am i taking wrong Q for the calculation. can i calculate u value by using TRNSYS i am not sure in TRNSYS ist calculate U and then Q or calculate Q by some other method????

3- (N-TYPE 50) in output can i get mathematical reference of this output NTYPE  to make sure how this type calculate u-value of glazing and frame.


Thanks for your time .

Regard