|
Dear all, I got a type55 (periodic integrator) output 6’s wrong output. I chose type55 to get the sum of the squares of the input to compute the penalty function (P71, GENOPTuser manual). But I found that the output6 of the type55 is not it should be, while other results, such as the minimum value and the mean value are right though. For example, the only one input for the type55 is from 1, 2, 3, 4, 5, 6, ……….to 24. The simulation step is 1hr, I want to evaluation the output6 from 8am to 16pm for everyday. The simulation time from 0 to 24 in the TRNSYS studio.The set of the typer55 parameter is as the following: Integrate or sum input: -1 Relative starting hour for input 7 hr Duration for input 8 hr Cycle repeat time for input 24 hr Reset time for input 24 hr Absolute starting hour for input 0 hr Absolute stopping hour for input 24 hr According to my understand, the output6 of type55 should be: For the 8th hour: 8*8=64 the 9th
hour: 8*8+9*9=136 the 10th
hour: 8*8+9*9+10*10=236 ………………. until add to 8*8+9*9+10*10+……………………+16*16 But the output6 of the type55 results was: (from 8th to 16th
):
May anybody help me figure out this problem? I am appreciated
for your reply. With best regards, Yours sincerely Weiwei
Chongqing University |