[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Solar absorptance and long wave emission coefficient



Fatmina,

0 and 1 aren't good choices for solar aporptance.
The manual of Type 56 (05-MultizoneBuilding.pdf) has a list of solar absorption values 
(5.2.4.2.2. DEFINITION OF A NEW WALL TYPE).
For longwave emissivity 0.9 is good value.

Marion 

----------------------------------------------------------------------------------------------------------------------------------------------------------- 
Dipl.-Ing. Marion Hiller 
TRANSSOLAR Energietechnik GmbH 
Stuttgart - Munich - New York - Paris  
t: +49.711.67976.0   f: +49.711.67976.11
www.transsolar.com/   

KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden 
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347 / Steuernummer: 99073/00911 / USt-IdNr.: DE 152272639
Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle 


-----Ursprüngliche Nachricht-----
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Fatima.HARKOUSS@unice.fr
Gesendet: Freitag, 30. Oktober 2015 14:20
An: trnsys-users@lists.onebuilding.org
Betreff: [TRNSYS-users] Solar absorptance and long wave emission coefficient

Dear Sirs

I am modeling a building on TRNSYS, I defined a zone, what will be the value of solar absorptance and long wave emission coefficient for the floor ( note that the exterior layer of floor is made of tiling), and also for internal walls do they have a solar absorptance and long wave emission coefficient or should I put it 0

Regards

Fatima Harkouss
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org