Re: [TRNSYS-users] Calculation of Energy consumed by Vapour compression system over the whole cooling season

[David BRADLEY <d.bradley@tess-inc.com>]

Wajahat Khan,
  In order to do this you need to know how the COP of the vapor compression cycle changes as a function of its inlet and ambient conditions. If you have a specific device from a particular manufacturer in mind then you can use their catalog data to construct a performance map of the vapor compression cycle that will be read by Type42.
regards,
 David

On 10/27/2015 15:48, wajahat Khan wrote:

I have constructed a solar assisted adsorption cooling system in trnsys in which i used a type 6 auxiliary heater to fulfill the auxilary energy requirement of chiller.To calculate how much energy is provided by auxilary over the whole season i just integrated the parameter "rate of energy delivered to fluid stream" from the output of type6.

Now i want to just use a simple VCS(vapour compression system) to meet the same fix load say 2TR and then i want to check how much energy will be used by this ac if all system is based on VCS.Please note that load is fix i.e. 2TR and i just want the energy delivered by ac over the whole season.How to do this in trnsys?

Please can any body have idea?

Regards

--

Engr M Wajahat Khan

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com