[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Weather Data parameters

Arnaud,
  I am not sure why the "azimuth of surface #" isn't getting recreated for each surface that you specify. It should be. It may be that either the Type15 proforma or the project file (*.tpf) has gotten corrupted. I would recommend that you send the project to your distributor for assistance.
kind regards,
 David


On 07/07/2015 07:09, Arnaud Candaele wrote:
Hi all,

I have a problem regarding the Weather Data parameters.
Basically, in these parameters, I define a certain number of surfaces, say 7. What it does is automatically create a number of additional parameters, for each surface : 
  • tracking mode-#
  • Slope of surface #
...and the last parameter is "Azimuth of surface", which appears only that one time, and not for every surface as I would expect. 
So, this gives me 21 parameters. When I launch the computation I get an error saying the unit 15 (Weather Data) requires 27 parameters and only 21 are specified... which makes perfect sense, but ..why is Simulation Studio not giving me these 27 parameters ?? What can I do ?

If I correct manually the deck file, and specify these 27 parameters, then run in batch (without going through Simulation Studio), it works fine...

Thanks for your help !

Arnaud.


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com