Hi David,
We are modeling a 3D building with external chiller and cooling coil. The problem we have is that even with gains in the zones, the airnode temperatures are lower than the ambient temperature. The cooling effect (through ventilation) is
almost zero yet the zone temperatures are low. That has puzzled us as to how is that possible.
Could you point me in the right direction?
Thanks
Hessam Taherian, PhD
Assistant Professor, and Thermal Fluid Systems Lab coordinator
SBA member ASHRAE, Member ASES, IBPSA-USA
Department of Mechanical Engineering
University of Alabama at Birmingham
Mailing address:
1720 Second Ave. S
BEC 257
Birmingham, AL 35294-4461
Email:
taherian@uab.edu
Office phone: (205) 934-8461
Lab phone: (205) 975-6706
http://scholar.google.com/citations?hl=en&user=UkA8HIgAAAAJ&view_op=list_works
Go Blazers!!
