[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Genopt trnbuild error

Martin Berov -

It is not finding your building model file when it starts the simulation.  GenOpt moves the files to run a simulation so you need to make sure all paths for files are complete.

Regards,

Tim

 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-04-14 14:06, Martin Berov wrote:

Hi,
 
I'm using Genopt to optimize parameters of solar heating system (first just the collector area and slope). I compiled the input file, defined the variables in genopt i.e. everything as required. bu when I run the optimization i get error message as table where is written:
 
Trnbuild
Surf-No                                       Description                                       Comment
-1                                          no OUTPUT's specified                     please add at least one output
 
In the Trnsys simulation environment I get output results (the model is properly functioning)
 
Do you have idea what could be the problem?
 
Best Regards
Martin
 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org