Re: [TRNSYS-users] Fogging Device - Type 507

[David BRADLEY <d.bradley@tess-inc.com>]

Without seeing the project, it isn't really possible to know what the cause is. I would recommend verifying your simulation by using some online plotters (Type65) to check the temperature, humidity, and flow rate of air as it flows through the system and into the building.
kind regards,
 David

On 3/25/2015 3:26 AM, oshafaamri@yahoo.com wrote:

Hello,

I have a small building of 1 zone in which i am using shading toldo for more thermal comfort, i also want to include an evaporative cooler (Fogging device) along with the shading, i've defined all the new inputs in the building for the fogging device (%RH, air flow rate and temperature) and connect it to the building, still i get the same operative temperature as with shading only, any idea ?

thanks 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com