Re: [TRNSYS-users] type9 + type15 for reading user weather data

[David BRADLEY <d.bradley@tess-inc.com>]

Sergio,
  Type15 reads data files that are in a very specific format. If the format of the file being provided does not match the format expected by Type15 then you can get this kind of error. For example, you will get this error if you tell Type15 that you are going to provide a TMY3 weather file but then you provide a TMY2 file. If you are certain that you have provided the same format file that is being expected by Type15 and are still getting the error then please send your project and the weather files to your distributor for assistance.
Kind regards,
 David

On 11/21/2014 00:24, Sergio.Pintaldi@csiro.au wrote:

Hi,

 

I’m using type9 to read my weather data and type15 to supply the rest of the data to the collector type. The problem is that the simulation is not working. The following messages are prompted:

- message (type9): the specified component model has exhausted the data supply and has rewound the data file to the begin reading from the top of the data file

- error(type15): unable to correctly read from the supplied data file – please check the file and re-run the simulation

 

I set up the correct time in the simulation and in the user weather file.

 

Somebody have idea how to fix that? The user file alone is read by TRNSYS without problems (I checked plotting the radiation output).

 

Thank you!

 

Sergio

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com