[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Control problem

To: "trnsys-users@lists.onebuilding.org" <trnsys-users@lists.onebuilding.org>
Subject: [TRNSYS-users] Control problem
From: "Atli Thor Olason (164693)" <164693@VIA.DK>
Date: Thu, 20 Nov 2014 10:48:26 +0000
Accept-language: en-US
List-archive: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/>
List-help: <mailto:trnsys-users-request@lists.onebuilding.org?subject=help>
List-id: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users-onebuilding.org>
List-post: <mailto:trnsys-users@lists.onebuilding.org>
List-subscribe: <http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>, <mailto:trnsys-users-request@lists.onebuilding.org?subject=subscribe>
List-unsubscribe: <http://lists.onebuilding.org/options.cgi/trnsys-users-onebuilding.org>, <mailto:trnsys-users-request@lists.onebuilding.org?subject=unsubscribe>
Reply-to: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org>
Thread-index: AQHQBK5FWK5AFvH2+kqSIS022hMlCg==
Thread-topic: Control problem

Hello fellow TRNSYS-users,

I need to control a pump on/off but it has to take three different control signals into account.

I also need to control a flow diverter that has to take two control signals into account.

Any ideas?

It would be greatly appreciated. I'm working on my bachelors project and quite stuck.

Follow-Ups:
- Re: [TRNSYS-users] Control problem
  - From: David BRADLEY <d.bradley@tess-inc.com>
- Re: [TRNSYS-users] Control problem
  - From: Ben Heymer <bheymer@gmail.com>

Prev by Date: [TRNSYS-users] (no subject)
Next by Date: [TRNSYS-users] Question about H2 electrolyzer Type 160
Previous by thread: [TRNSYS-users] total heating rate and total cooling rate in heat pump 954
Next by thread: Re: [TRNSYS-users] Control problem
Index(es):
- Date
- Thread