[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Problem with window in TRNbuild
In short, no, I don't think so and I wouldn't hope so.
I suggest using WINDOW. Afterward, you will see that your request is
strange in that their should be no reason to try and simulate
something that does not or cannot exist with a simulation program
trying to align itself with reality. Sorry if my response sounds
harsh...it is only meant to encourage you to think a little into the
physics underlaying the models.
PS Their is plenty more than the reflectivity that influences heat
gain/loss through and by the glass and window assembly.
Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 19.08.2014, at 10:51, Nikolaos Skandalos <nskandalos@upatras.gr>
wrote:
Dear TRNSYS users,
I used type 56 to model an office with external windows. Apart from
using WINDOW software, is there any idea of how can I adjust the
reflectivity of the window (from 0 to 100% with 10% steps) ? I want
to investigate if there is an influence on the air temperature of
the office.
Best regards,
Nikolaos Skandalos
University of Patras
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org