[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS 17 build - Intel Visual Fortran & Microsoft Visual Studio



Michaël, David, Marion,

I was indeed able to compile without errors once I commented out line 50 of callprogram. 

Fortunately (or unfortunately depending on how you look at it), I'm using Harmonizer, so I won't have any problems if Fluent or Type 56 are affected by the change but it's good to know for future reference.

Thanks to all of you for your prompt assistance.
Briana

Briana Paige Kemery, BEng, EIT

sustainable building energy systems

 +1 613 795 1432
​​
 @SBES_group
 
sbes.ca


On 3 June 2014 05:01, Marion Hiller <Hiller@transsolar.com> wrote:

David and Briana,

 

Type 56 also uses callprogram. J

However, I commented out the line 50 and everything is running fine.

 

For building simulation with type56 you can check this by the date of the *.inf  file.

This file should be generated before each simulation.

 

Marion

 


Von: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] Im Auftrag von David BRADLEY
Gesendet: Montag, 2. Juni 2014 21:44
An: TRNSYS users mailing list at the Solar Energy Lab, UW-Madison; briana.paige@sbes.ca
Betreff: Re: [TRNSYS-users] TRNSYS 17 build - Intel Visual Fortran & Microsoft Visual Studio

 

Briana,
  I'm afraid I don't have that version of the compiler and it sounds as though there has been a slight change that will require a change in callprogram. Michaël is quite correct that callprogram is only used by a few standard components (Type101 (calling fluent) and Type66 (calling EES)). You can either comment out the offending line or you can simply exclude Type101, Type66 and callprogram from the project when you rebuild it.
Kind regards,
 David
 

On 6/2/2014 12:41, Briana Paige Kemery wrote:

Hi,

 

I need to create my own type and this is what I'm using:

 

OS: Windows 8.1 Pro

TRNSYS version: 17.01.0025

Microsoft Visual Studio: Version 12.0.30501.00 Update 2

Intel Visual Fortran Composer XE 2013 SP1: Package ID: w_fcompxe_2013_sp1.3.202

 

I opened:

 

C:\Trnsys17\Compilers\Ivf11x\lvf11x.sln 

 

in VS and tried to build the release version of the solution. Even before compiling with the type I'm creating, I get the 2 fatal errors and the build is aborted. This is the build output for TRNSYS 17 without any added types:

 

2>Callprogram.f90

2>C:\Trnsys17\SourceCode\Kernel\Callprogram.f90(50): error #6580: Name in only-list does not exist.   [CREATEPROCESS]

2>compilation aborted for C:\Trnsys17\SourceCode\Kernel\Callprogram.f90 (code 1)

 

Line 50 in Callprogram.f90 where the error is thrown:

 

50    Use ifport , only:createProcess

 

Maybe I'm missing something or there's a compatibility problem between TRNSYS and the Fortran compiler? I'd appreciate any insight on this problem.

 

Thanks,

Briana

 

Sustainable Building Energy Systems




_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users



-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
 
http://www.tess-inc.com
http://www.trnsys.com