[TRNSYS-users] Type 93_Input Value Recall

To: trnsys-users <trnsys-users@cae.wisc.edu>, David BRADLEY <d.bradley@tess-inc.com>

Subject: [TRNSYS-users] Type 93_Input Value Recall

Date: Fri, 23 May 2014 21:01:38 +0200

Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=Ed5TNaS5yRa0LJdYqjjKwGn3MUwUrjb6fPNSaFkwOA8=; b=YbxZ8fukM2GzB5VrECRgJlHlcCl2UThgswNB/+pQwJqSL+vaUGh4q7YQcv0Z8IMSRR wt88zGLz9uYvoh6GsiRJjCR6HxZ4pqlEkp45RCVvv+V4Nu/hEZ+VsywfPSGTtjHM9wE8 LVtVNMi8GRJEqwuIxxt2DXkBTQ+C1I9v7gOebWYHYW/zHSMbQLUgmGBbIm+kLi9XndKO VO+KQ9Q3c2+8av/kAPYGG5XvJ4UlI7dyNG9cNoRpPcpltbUvDaQbzWbGgiGHSAmoBaPD Iv+jn8IJ+J8qEgXBgXXeEk24rTzYTtpByh/nHBrWHCn90TZ7XBXctOcvNEWUFIdBtVmd gZJQ==

List-archive: <http://mailman.cae.wisc.edu/pipermail/trnsys-users>

List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>

List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>

List-post: <mailto:trnsys-users@cae.wisc.edu>

List-subscribe: <https://mailman.cae.wisc.edu/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>

List-unsubscribe: <https://mailman.cae.wisc.edu/options/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>

Reply-to: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users@cae.wisc.edu>

Dear all and Mr. Bradley,

I used Type 93 to obtain TSI_S7 (inside surface temperature of ceiling) of last time step as the input of my Equation. Therefore, I need to store 1 input for 1 timestep (these are the two parameters in Type93). My idea is that I get the result of Type56 (TSI_S7 temperature) and use it as input1 to Type93. Then, I use the output from Type93 as the temperature that I use in my equation. However, after running, it always exists the ERROR as follows:

*** Fatal Error at time   :         0.000000
    Generated by Unit     :    44
    Generated by Type     :    93
    TRNSYS Message    103 : The TRNSYS TYPE checking routine has found an inconsistency in the specified component between the input file and the information expected by the Type
    Reported information : An illegal number of INPUTS has been specified for this component. Please check the component configuration. 1 INPUTS are required and 2 were specified.

Attached is Lst File.

However, There are 2 Inputs for Type 93. One links to TSI_S7 (inside surface temperature of ceiling), another is Noname. How should I deal with 2nd Input Noname?

How could I deal with this ERROR problem?

Many thanks in advance!

Br.

yang wang

2014-05-23 19:00 GMT+02:00 <trnsys-users-request@cae.wisc.edu>:

Send TRNSYS-users mailing list submissions to
trnsys-users@cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.cae.wisc.edu/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
trnsys-users-request@cae.wisc.edu

You can reach the person managing the list at
trnsys-users-owner@cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."

Today's Topics:

1. Re: problem with type 752e (David BRADLEY)

---------- 已转发邮件 ----------
From: David BRADLEY <d.bradley@tess-inc.com>
To: Nidal Abdalla <nidalabdalla@yahoo.com>, "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users@cae.wisc.edu>
Cc:
Date: Fri, 23 May 2014 11:31:05 -0500
Subject: Re: [TRNSYS-users] problem with type 752e
Nidal,
My apologies for the delay in getting back to you. This is a known bug with one of the modes of Type752. The fix is in the next scheduled release. If you need the fix immediately, please contact your distributor and we can get it to you through them.
Kind regards,
David

On 5/18/2014 18:44, Nidal Abdalla wrote:
Dear all

I am trying use of type 752e to control the humidity ratio with type 56 (in TRNSYS 17). But I couldn't find Absolute Humidity Ratio in the input tab. It is replaced with "Not Used". Moreover an error occur when I run tpf file as: "trnsys message 142 for type 752: a three litter unit code was set for an input number beyond the range reserve for this type". I changed humidity mode to 1, but the problem still found.

Any one can help me?

regards

Nidal
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

TRNSYS - the TRaNsient SYstem Simulation program The Solar Energy Lab at the University of Wisconsin - Madison, USA Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France Transsolar Energietechnik GmBH, Stuttgart, Germany Thermal Energy System Specialists, Madison Wisconsin, USA Release 16.01.0003 Listing file for: "V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.dck" *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Programme\TRNSYS16_1\Exe" *** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors. *** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found. *** Evaluating the EQUATIONs and CONSTANTs to determine their initial values. *** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file. VERSION 16 ******************************************************************************* *** TRNSYS input file (deck) generated by TrnsysStudio *** on Freitag, Mai 23, 2014 at 20:50 *** from TrnsysStudio project: V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.tpf *** *** If you edit this file, use the File/Import TRNSYS Input File function in *** TrnsysStudio to update the project. *** *** If you have problems, questions or suggestions please contact your local *** TRNSYS distributor or mailto:software@cstb.fr *** ******************************************************************************* ******************************************************************************* *** Units ******************************************************************************* ******************************************************************************* *** Control cards ******************************************************************************* * START, STOP and STEP CONSTANTS 3 START=0 STOP=8760 STEP=0.1 * User defined CONSTANTS ! Start time End time Time step SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000001E-01 ! Integration Convergence TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03 ! Max iterations Max warnings Trace limit LIMITS 30 30 31 ! TRNSYS numerical integration solver method DFQ 1 ! TRNSYS output file width, number of characters WIDTH 72 ! NOLIST statement LIST ! MAP statement ! Solver statement Minimum relaxation factor Maximum relaxation factor SOLVER 0 1.000000000000000 1.000000000000000 ! Nan DEBUG statement NAN_CHECK 0 ! Overwrite DEBUG statement OVERWRITE_CHECK 0 ! disable time report TIME_REPORT 0 ! EQUATION SOLVER statement EQUATION SOLVING METHOD 0 * EQUATIONS "Turn" * EQUATIONS 5 TURN = 345 AA_N = 180 + TURN AA_S = TURN AA_E = -90 + TURN AA_W = 90 + TURN *$UNIT_NAME Turn *$LAYER Main *$POSITION 49 61 *------------------------------------------------------------------------------ * EQUATIONS "Radiation" * EQUATIONS 18 AISZ = [109,10] AISA = [109,11] IT_H = Max([109,12],0) IB_H = Max([109,13],0) ID_H = [109,14] AI_H = [109,16] IT_N = [109,18] AI_N = [109,22] IB_N = [109,19] * LT(AI_N,90) IT_S = [109,24] IB_S = [109,25] AI_S = [109,28] IT_E = [109,30] IB_E = [109,31] AI_E = [109,34] IT_W = [109,36] IB_W = [109,37] AI_W = [109,40] *$UNIT_NAME Radiation *$LAYER Main *$POSITION 195 125 *------------------------------------------------------------------------------ * EQUATIONS "Shading+Light" * EQUATIONS 2 ! 24 S_SOUTH = [202,1] ! 27 BRIGHT = [200,1] *$UNIT_NAME Shading+Light *$LAYER Controls *$POSITION 664 722 *------------------------------------------------------------------------------ * Model "Weather data" (Type 109) * UNIT 109 TYPE 109 data *$UNIT_NAME Weather data *$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf *$POSITION 95 200 *$LAYER Main # PARAMETERS 4 ! 1 Data Reader Mode ! 2 Logical unit ! 3 Sky model for diffuse radiation ! 4 Tracking mode 2.0000000000000000E+00 3.0000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00 INPUTS 9 ! [unconnected] Ground reflectance ! [unconnected] Slope of surface-1 ! [unconnected] Azimuth of surface-1 ! [unconnected] Slope of surface-2 ! [unconnected] Azimuth of surface-2 ! [unconnected] Slope of surface-3 ! [unconnected] Azimuth of surface-3 ! [unconnected] Slope of surface-4 ! [unconnected] Azimuth of surface-4 CONST CONST CONST CONST CONST CONST CONST CONST CONST *** INITIAL INPUT VALUES 2.0000000000000001E-01 9.0000000000000000E+01 5.2500000000000000E+02 9.0000000000000000E+01 3.4500000000000000E+02 9.0000000000000000E+01 2.5500000000000000E+02 9.0000000000000000E+01 4.3500000000000000E+02 *** External files ASSIGN U:\work\TRNSYS Weather\Weather\Meteonorm\Europe\DE-Muenchen-Airp-108700.tm2 30 *|? Weather data file |1000 *------------------------------------------------------------------------------ * Model "Psychrometrics" (Type 33) * UNIT 331 TYPE 33 *$UNIT_NAME Psychrometrics *$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf *$POSITION 204 325 *$LAYER Main # PARAMETERS 3 ! 1 Psychrometrics mode ! 2 Wet bulb mode ! 3 Error mode 2.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 INPUTS 3 ! Weather data:Ambient temperature ->Dry bulb temp. ! Weather data:relative humidity ->Percent relative humidity ! [unconnected] Pressure 109,1 109,2 CONST *** INITIAL INPUT VALUES 2.0000000000000000E+01 5.0000000000000000E+01 1.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Sky temp" (Type 69) * UNIT 69 TYPE 69 temp *$UNIT_NAME Sky temp *$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf *$POSITION 354 273 *$LAYER Main # # PARAMETERS 2 ! 1 mode for cloudiness factor ! 2 height over sea level 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 4 ! Psychrometrics:Dry bulb temperature ->Ambient temperature ! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions ! Weather data:beam radiation on horitonzal ->Beam radiation on the horizontal ! Weather data:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal 331,7 331,8 109,13 109,14 *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "Light Thresholds" * EQUATIONS 2 Toth_L_on = -3.6*120 Eoth_L_off = -3.6*200 *$UNIT_NAME Light Thresholds *$LAYER Controls *$POSITION 461 530 *------------------------------------------------------------------------------ * Model "Lights" (Type 2) * UNIT 200 TYPE 2 *$UNIT_NAME Lights *$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf *$POSITION 566 541 *$LAYER Controls # *$# NOTE: This controller can only be used with Solver 0 (Successive substitution) *$# *$# *$# *$# *$# *$# *$# *$# *$# PARAMETERS 2 ! 1 No. of oscillations ! 2 High limit cut-out 5.0000000000000000E+00 4.0000000000000000E+04 INPUTS 6 ! [unconnected] Upper input value ! Radiation:IT_H ->Lower input value ! [unconnected] Monitoring value ! Lights:Output control function ->Input control function ! Light Thresholds:Toth_L_on ->Upper dead band ! Light Thresholds:Eoth_L_off ->Lower dead band CONST IT_H CONST 200,1 TOTH_L_ON EOTH_L_OFF *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Shading S" (Type 2) * UNIT 202 TYPE 2 S *$UNIT_NAME Shading S *$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf *$POSITION 346 754 *$LAYER Controls # *$# NOTE: This controller can only be used with Solver 0 (Successive substitution) *$# *$# *$# *$# *$# *$# *$# *$# *$# PARAMETERS 2 ! 1 No. of oscillations ! 2 High limit cut-out 5.0000000000000000E+00 5.0000000000000000E+03 INPUTS 6 ! Radiation:IT_S ->Upper input value ! [unconnected] Lower input value ! [unconnected] Monitoring value ! Shading S:Output control function ->Input control function ! [unconnected] Upper dead band ! [unconnected] Lower dead band IT_S CONST CONST 202,1 CONST CONST *** INITIAL INPUT VALUES 1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0800000000000000E+03 3.6000000000000000E+02 *------------------------------------------------------------------------------ * Model "Building" (Type 56) * UNIT 56 TYPE 56 *$UNIT_NAME Building *$MODEL .\Loads and Structures\Multi-Zone Building\With Standard Output Files\Type56a.tmf *$POSITION 737 594 *$LAYER Main # # *$# PARAMETERS 6 ! 1 Logical unit for building description file (.bui) ! 2 Star network calculation switch ! 3 Weighting factor for operative temperature ! 4 Logical unit for monthly summary ! 5 Logical unit for hourly temperatures ! 6 Logical unit for hourly loads 3.1000000000000000E+01 1.0000000000000000E+00 5.0000000000000000E-01 3.2000000000000000E+01 3.3000000000000000E+01 3.4000000000000000E+01 INPUTS 31 ! Psychrometrics:Dry bulb temperature -> 1- TAMB ! Psychrometrics:Percent relative humidity -> 2- RELHUMAMB ! Sky temp:Fictive sky temperature -> 3- TSKY ! Radiation:IT_N -> 4- IT_NORTH ! Radiation:IT_S -> 5- IT_SOUTH ! Radiation:IT_E -> 6- IT_EAST ! Radiation:IT_W -> 7- IT_WEST ! Radiation:IT_H -> 8- IT_HORIZONTAL ! Radiation:IB_N -> 9- IB_NORTH ! Radiation:IB_S -> 10- IB_SOUTH ! Radiation:IB_E -> 11- IB_EAST ! Radiation:IB_W -> 12- IB_WEST ! Radiation:IB_H -> 13- IB_HORIZONTAL ! Radiation:AI_N -> 14- AI_NORTH ! Radiation:AI_S -> 15- AI_SOUTH ! Radiation:AI_E -> 16- AI_EAST ! Radiation:AI_W -> 17- AI_WEST ! Radiation:AI_H -> 18- AI_HORIZONTAL ! [unconnected] 19- CNAT_1 ! [unconnected] 20- T_COOL_ON ! [unconnected] 21- S_NORTH ! S_South:Shading_South -> 22- S_SOUTH ! [unconnected] 23- S_EAST ! [unconnected] 24- S_WEST ! Shading+Light:BRIGHT -> 25- BRIGHT ! winter heating:heating -> 26- WINTER ! [unconnected] 27- SUMMER ! Tcool:Tcool -> 28- TCOOL ! Vent Rate:dayvent -> 29- DAYVECH ! People Occupancy:peopleoccupancy -> 30- PEOPLEOCCUPANCY ! Vent Temp:tempnightvent -> 31- TNIGHTVENT 331,7 331,6 69,1 IT_N IT_S IT_E IT_W IT_H IB_N IB_S IB_E IB_W IB_H AI_N AI_S AI_E AI_W AI_H CONST CONST CONST SHADING_SOUTH CONST CONST BRIGHT HEATING CONST TCOOL DAYVENT PEOPLEOCCUPANCY TEMPNIGHTVENT *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *** External files ASSIGN BuildingProject12.bui 31 *|? Building description file (*.bui) |1000 ASSIGN T56_std-Output.sum 32 *|? Monthly Summary File |1000 ASSIGN T56_std-temp.prn 33 *|? Hourly Temperatures |1000 ASSIGN T56_std-q.prn 34 *|? Hourly Loads |1000 *------------------------------------------------------------------------------ * Model "Temperature" (Type 65) * UNIT 25 TYPE 65 *$UNIT_NAME Temperature *$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf *$POSITION 1143 605 *$LAYER Main # # PARAMETERS 12 ! 1 Nb. of left-axis variables ! 2 Nb. of right-axis variables ! 3 Left axis minimum ! 4 Left axis maximum ! 5 Right axis minimum ! 6 Right axis maximum ! 7 Number of plots per simulation ! 8 X-axis gridpoints ! 9 Shut off Online w/o removing ! 10 Logical unit for output file ! 11 Output file units ! 12 Output file delimiter 6.0000000000000000E+00 9.0000000000000000E+00 -1.0000000000000000E+01 3.6000000000000000E+01 -1.0000000000000000E+01 3.6000000000000000E+01 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 15 ! Building: 1- TAIR_ROOM228 ->Left axis variable-1 ! Type91:Cold-side outlet temperature ->Left axis variable-2 ! Weather data:Ambient temperature ->Left axis variable-3 ! Type91:Heat transfer rate ->Left axis variable-4 ! Vent Rate:dayvent ->Left axis variable-5 ! Vent Temp:tempnightvent ->Left axis variable-6 ! [unconnected] Right axis variable-1 ! Building: 13- TSI_S6 ->Right axis variable-2 ! Building: 4- QVENT_ROOM228 ->Right axis variable-3 ! Building: 6- QHEAT_ROOM228 ->Right axis variable-4 ! Building: 7- QCOOL_ROOM228 ->Right axis variable-5 ! Weather data:total radiation on horizontal ->Right axis variable-6 ! Weather data:beam radiation on horitonzal ->Right axis variable-7 ! Building: 14- TSI_S7 ->Right axis variable-8 ! [unconnected] Right axis variable-9 56,1 26,3 109,1 26,5 DAYVENT TEMPNIGHTVENT CONST 56,13 56,4 56,6 56,7 109,12 109,13 56,14 CONST *** INITIAL INPUT VALUES Tair_room Top_room Tamb Tamb_ trn Vent Rate Vent Temp Tceil _in Tnorthinwall QVENT_ROOM228 QHEAT_ROOM228 QCOOL_ROOM 228 TSI_S 7 QSENS_ROOM228 LABELS 3 Temperatures [deg C] Energy demand [kJ] Temperatures *------------------------------------------------------------------------------ * Model "winter" (Type 14) * UNIT 13 TYPE 14 *$UNIT_NAME winter *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1041 509 *$LAYER Main # PARAMETERS 12 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 0.0000000000000000E+00 1.0000000000000000E+00 2.1600000000000000E+03 1.0000000000000000E+00 2.1600000000000000E+03 0.0000000000000000E+00 6.5520000000000000E+03 0.0000000000000000E+00 6.5520000000000000E+03 1.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "MaytoSep" (Type 14) * UNIT 14 TYPE 14 *$UNIT_NAME MaytoSep *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1002 50 *$LAYER Main # PARAMETERS 12 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 0.0000000000000000E+00 0.0000000000000000E+00 2.8800000000000000E+03 0.0000000000000000E+00 2.8800000000000000E+03 1.0000000000000000E+00 6.5520000000000000E+03 1.0000000000000000E+00 6.5520000000000000E+03 0.0000000000000000E+00 8.7600000000000000E+03 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "Tcool" * EQUATIONS 3 summer = ge(time,2162)*lt(time,6552) winter = 1-summer Tcool = 35-9*(summer*[23,2]*[22,2]*nonholiday) *$UNIT_NAME Tcool *$LAYER Main *$POSITION 839 434 *------------------------------------------------------------------------------ * Model "Type24" (Type 24) * UNIT 16 TYPE 24 *$UNIT_NAME Type24 *$MODEL .\Utility\Integrators\Quantity Integrator\Type24.tmf *$POSITION 1033 719 *$LAYER Main # PARAMETERS 2 ! 1 Integration period ! 2 Relative or absolute start time 8.7600000000000000E+03 0.0000000000000000E+00 INPUTS 1 ! Building: 3- QINF_ROOM228 ->Input to be integrated 56,3 *** INITIAL INPUT VALUES 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Type9e" (Type 9) * UNIT 17 TYPE 9 *$UNIT_NAME Type9e *$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf *$POSITION 371 829 *$LAYER Weather - Data Files # PARAMETERS 54 ! 1 Mode ! 2 Header Lines to Skip ! 3 No. of values to read ! 4 Time interval of data ! 5 Interpolate or not-1 ! 6 Multiplication factor-1 ! 7 Addition factor-1 ! 8 Average or instantaneous value-1 ! 9 Interpolate or not-2 ! 10 Multiplication factor-2 ! 11 Addition factor-2 ! 12 Average or instantaneous value-2 ! 13 Interpolate or not-3 ! 14 Multiplication factor-3 ! 15 Addition factor-3 ! 16 Average or instantaneous value-3 ! 17 Interpolate or not-4 ! 18 Multiplication factor-4 ! 19 Addition factor-4 ! 20 Average or instantaneous value-4 ! 21 Interpolate or not-5 ! 22 Multiplication factor-5 ! 23 Addition factor-5 ! 24 Average or instantaneous value-5 ! 25 Interpolate or not-6 ! 26 Multiplication factor-6 ! 27 Addition factor-6 ! 28 Average or instantaneous value-6 ! 29 Interpolate or not-7 ! 30 Multiplication factor-7 ! 31 Addition factor-7 ! 32 Average or instantaneous value-7 ! 33 Interpolate or not-8 ! 34 Multiplication factor-8 ! 35 Addition factor-8 ! 36 Average or instantaneous value-8 ! 37 Interpolate or not-9 ! 38 Multiplication factor-9 ! 39 Addition factor-9 ! 40 Average or instantaneous value-9 ! 41 Interpolate or not-10 ! 42 Multiplication factor-10 ! 43 Addition factor-10 ! 44 Average or instantaneous value-10 ! 45 Interpolate or not-11 ! 46 Multiplication factor-11 ! 47 Addition factor-11 ! 48 Average or instantaneous value-11 ! 49 Interpolate or not-12 ! 50 Multiplication factor-12 ! 51 Addition factor-12 ! 52 Average or instantaneous value-12 ! 53 Logical unit for input file ! 54 Free format mode 3.0000000000000000E+00 0.0000000000000000E+00 1.2000000000000000E+01 1.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 3.5000000000000000E+01 -1.0000000000000000E+00 *** External files ASSIGN U:\Sim\FOS\weather\TRY\muenchen.yea 35 *|? Input file name |1000 *------------------------------------------------------------------------------ * Model "Temperature-2" (Type 65) * UNIT 18 TYPE 65 *$UNIT_NAME Temperature-2 *$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf *$POSITION 279 850 *$LAYER Main # PARAMETERS 12 ! 1 Nb. of left-axis variables ! 2 Nb. of right-axis variables ! 3 Left axis minimum ! 4 Left axis maximum ! 5 Right axis minimum ! 6 Right axis maximum ! 7 Number of plots per simulation ! 8 X-axis gridpoints ! 9 Shut off Online w/o removing ! 10 Logical unit for output file ! 11 Output file units ! 12 Output file delimiter 2.0000000000000000E+00 5.0000000000000000E+00 -1.6000000000000000E+01 1.0000000000000000E+02 0.0000000000000000E+00 1.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 7 ! Type9e:Output 5 ->Left axis variable-1 ! Type9e:Output 6 ->Left axis variable-2 ! Type9e:Output 7 ->Right axis variable-1 ! Type9e:Output 8 ->Right axis variable-2 ! Equa-2:beam_h ->Right axis variable-3 ! Equa-2:diffuse_h ->Right axis variable-4 ! Equa-2:glo_hor ->Right axis variable-5 17,5 17,6 17,7 17,8 BEAM_H DIFFUSE_H GLO_HOR *** INITIAL INPUT VALUES Tair_ambient RHamb IT_S IT_H beam diffuse global LABELS 3 Temperatures [deg C] Energy demand [kJ] Temperatures *------------------------------------------------------------------------------ * EQUATIONS "Equa" * EQUATIONS 3 IT_hor = max(IT_horabs,0) IT_South = 3.6*[17,7] IT_horabs = [17,8]*3.6 *$UNIT_NAME Equa *$LAYER Main *$POSITION 496 829 *------------------------------------------------------------------------------ * EQUATIONS "Equa-2" * EQUATIONS 3 beam_h = [109,13]/3.6 diffuse_h = [109,14]/3.6 glo_hor = [109,12]/3.6 *$UNIT_NAME Equa-2 *$LAYER Main *$POSITION 59 509 *------------------------------------------------------------------------------ * Model "Workdays" (Type 14) * UNIT 22 TYPE 14 *$UNIT_NAME Workdays *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 806 338 *$LAYER Main # PARAMETERS 10 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "School Daytime" (Type 14) * UNIT 23 TYPE 14 Daytime *$UNIT_NAME School Daytime *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 948 338 *$LAYER Main # PARAMETERS 12 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00 1.0000000000000000E+00 1.7000000000000000E+01 1.0000000000000000E+00 1.7000000000000000E+01 0.0000000000000000E+00 2.4000000000000000E+01 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "winter heating" * EQUATIONS 1 heating = [23,2]*[22,2]*[13,2]*nonholiday *$UNIT_NAME winter heating *$LAYER Main *$POSITION 923 520 *------------------------------------------------------------------------------ * Model "Type91" (Type 91) * UNIT 26 TYPE 91 *$UNIT_NAME Type91 *$MODEL .\Heat Exchangers\Constant Effectiveness\Type91.tmf *$POSITION 403 434 *$LAYER Main # PARAMETERS 3 ! 1 Heat exchanger effectiveness ! 2 Specific heat of hot side fluid ! 3 Specific heat of cold side fluid 8.0000000000000004E-01 1.0120000000000000E+00 1.0120000000000000E+00 INPUTS 4 ! Building: 1- TAIR_ROOM228 ->Hot side inlet temperature ! [unconnected] Hot side flow rate ! Psychrometrics:Dry bulb temperature ->Cold side inlet temperature ! [unconnected] Cold side flow rate 56,1 CONST 331,7 CONST *** INITIAL INPUT VALUES 2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02 *------------------------------------------------------------------------------ * Model "Type65c" (Type 65) * UNIT 27 TYPE 65 *$UNIT_NAME Type65c *$MODEL .\Output\Online Plotter\Online Plotter With File\No Units\Type65c.tmf *$POSITION 940 744 *$LAYER Main # PARAMETERS 12 ! 1 Nb. of left-axis variables ! 2 Nb. of right-axis variables ! 3 Left axis minimum ! 4 Left axis maximum ! 5 Right axis minimum ! 6 Right axis maximum ! 7 Number of plots per simulation ! 8 X-axis gridpoints ! 9 Shut off Online w/o removing ! 10 Logical Unit for output file ! 11 Output file units ! 12 Output file delimiter 6.0000000000000000E+00 1.0000000000000000E+01 -1.0000000000000000E+01 3.0000000000000000E+01 -5.0000000000000000E+03 5.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 3.6000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 16 ! Building: 1- TAIR_ROOM228 ->Left axis variable-1 ! Type91:Heat transfer rate ->Left axis variable-2 ! Psychrometrics:Dry bulb temperature ->Left axis variable-3 ! [unconnected] Left axis variable-4 ! [unconnected] Left axis variable-5 ! [unconnected] Left axis variable-6 ! Building: 2- QSENS_ROOM228 ->Right axis variable-1 ! Building: 3- QINF_ROOM228 ->Right axis variable-2 ! Building: 4- QVENT_ROOM228 ->Right axis variable-3 ! Building: 6- QHEAT_ROOM228 ->Right axis variable-4 ! Building: 7- QCOOL_ROOM228 ->Right axis variable-5 ! [unconnected] Right axis variable-6 ! [unconnected] Right axis variable-7 ! [unconnected] Right axis variable-8 ! [unconnected] Right axis variable-9 ! [unconnected] Right axis variable-10 56,1 26,5 331,7 CONST CONST CONST 56,2 56,3 56,4 56,6 56,7 CONST CONST CONST CONST CONST *** INITIAL INPUT VALUES Tair_room Top_room Tamb Tamb_ trn label label QSENS Qinf Qvent Qheat Qcool total beam label label label LABELS 3 Temperatures [deg C] Energy demand [kJ] Graph 1 *** External files ASSIGN V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.plt 36 *|? What file should the online print to? |1000 *------------------------------------------------------------------------------ * Model "holidays1" (Type 14) * UNIT 28 TYPE 14 *$UNIT_NAME holidays1 *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1060 242 *$LAYER Main # PARAMETERS 34 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 ! 13 Time at point-6 ! 14 Value at point -6 ! 15 Time at point-7 ! 16 Value at point -7 ! 17 Time at point-8 ! 18 Value at point -8 ! 19 Time at point-9 ! 20 Value at point -9 ! 21 Time at point-10 ! 22 Value at point -10 ! 23 Time at point-11 ! 24 Value at point -11 ! 25 Time at point-12 ! 26 Value at point -12 ! 27 Time at point-13 ! 28 Value at point -13 ! 29 Time at point-14 ! 30 Value at point -14 ! 31 Time at point-15 ! 32 Value at point -15 ! 33 Time at point-16 ! 34 Value at point -16 0.0000000000000000E+00 1.0000000000000000E+00 1.6800000000000000E+02 1.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00 1.5130000000000000E+03 0.0000000000000000E+00 1.5130000000000000E+03 1.0000000000000000E+00 1.6800000000000000E+03 1.0000000000000000E+00 1.6800000000000000E+03 0.0000000000000000E+00 2.5440000000000000E+03 0.0000000000000000E+00 2.5440000000000000E+03 1.0000000000000000E+00 2.8800000000000000E+03 1.0000000000000000E+00 2.8800000000000000E+03 0.0000000000000000E+00 3.9360000000000000E+03 0.0000000000000000E+00 3.9360000000000000E+03 1.0000000000000000E+00 3.9360000000000000E+03 1.0000000000000000E+00 4.2480000000000000E+03 1.0000000000000000E+00 4.2480000000000000E+03 0.0000000000000000E+00 8.7600000000000000E+03 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "holidays2" (Type 14) * UNIT 29 TYPE 14 *$UNIT_NAME holidays2 *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1145 242 *$LAYER Main # PARAMETERS 26 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 ! 13 Time at point-6 ! 14 Value at point -6 ! 15 Time at point-7 ! 16 Value at point -7 ! 17 Time at point-8 ! 18 Value at point -8 ! 19 Time at point-9 ! 20 Value at point -9 ! 21 Time at point-10 ! 22 Value at point -10 ! 23 Time at point-11 ! 24 Value at point -11 ! 25 Time at point-12 ! 26 Value at point -12 0.0000000000000000E+00 0.0000000000000000E+00 5.0400000000000000E+03 0.0000000000000000E+00 5.0400000000000000E+03 1.0000000000000000E+00 6.1200000000000000E+03 1.0000000000000000E+00 6.1200000000000000E+03 0.0000000000000000E+00 7.2240000000000000E+03 0.0000000000000000E+00 7.2240000000000000E+03 1.0000000000000000E+00 7.4400000000000000E+03 1.0000000000000000E+00 7.4400000000000000E+03 0.0000000000000000E+00 8.5680000000000000E+03 0.0000000000000000E+00 8.5680000000000000E+03 1.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00 8.7600000000000000E+03 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "non holiday" * EQUATIONS 1 nonholiday = 1-([29,1]+[28,1]) *$UNIT_NAME non holiday *$LAYER Main *$POSITION 1112 337 *------------------------------------------------------------------------------ * Model "Day Occupancy" (Type 14) * UNIT 31 TYPE 14 Occupancy *$UNIT_NAME Day Occupancy *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 896 40 *$LAYER Main # PARAMETERS 36 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 ! 13 Time at point-6 ! 14 Value at point -6 ! 15 Time at point-7 ! 16 Value at point -7 ! 17 Time at point-8 ! 18 Value at point -8 ! 19 Time at point-9 ! 20 Value at point -9 ! 21 Time at point-10 ! 22 Value at point -10 ! 23 Time at point-11 ! 24 Value at point -11 ! 25 Time at point-12 ! 26 Value at point -12 ! 27 Time at point-13 ! 28 Value at point -13 ! 29 Time at point-14 ! 30 Value at point -14 ! 31 Time at point-15 ! 32 Value at point -15 ! 33 Time at point-16 ! 34 Value at point -16 ! 35 Time at point-17 ! 36 Value at point -17 0.0000000000000000E+00 0.0000000000000000E+00 8.0000000000000000E+00 0.0000000000000000E+00 8.0000000000000000E+00 1.0000000000000000E+00 9.5000000000000000E+00 1.0000000000000000E+00 9.5000000000000000E+00 0.0000000000000000E+00 9.7500000000000000E+00 0.0000000000000000E+00 9.7500000000000000E+00 1.0000000000000000E+00 1.1250000000000000E+01 1.0000000000000000E+00 1.1250000000000000E+01 0.0000000000000000E+00 1.1500000000000000E+01 0.0000000000000000E+00 1.1500000000000000E+01 1.0000000000000000E+00 1.3000000000000000E+01 1.0000000000000000E+00 1.3000000000000000E+01 0.0000000000000000E+00 1.3750000000000000E+01 0.0000000000000000E+00 1.3750000000000000E+01 1.0000000000000000E+00 1.6000000000000000E+01 1.0000000000000000E+00 1.6000000000000000E+01 0.0000000000000000E+00 2.4000000000000000E+01 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Workdays-2" (Type 14) * UNIT 32 TYPE 14 *$UNIT_NAME Workdays-2 *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 800 40 *$LAYER Main # PARAMETERS 10 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "Occupancy" * EQUATIONS 1 occupancy = [32,1]*[31,1] *$UNIT_NAME Occupancy *$LAYER Main *$POSITION 862 189 *------------------------------------------------------------------------------ * EQUATIONS "Vent Rate" * EQUATIONS 2 dayvent = (2.75*occupancy)*[36,1]*[23,1]*nonholiday+1.3*[37,1]*[14,1] winterdayvent = (2.38*occupancy+0.37)*[36,1]*[23,1]*nonholiday*(1-[14,1]) *$UNIT_NAME Vent Rate *$LAYER Main *$POSITION 961 221 *------------------------------------------------------------------------------ * EQUATIONS "People Occupancy" * EQUATIONS 1 peopleoccupancy = occupancy*nonholiday *$UNIT_NAME People Occupancy *$LAYER Main *$POSITION 785 210 *------------------------------------------------------------------------------ * Model "Workdays-3" (Type 14) * UNIT 36 TYPE 14 *$UNIT_NAME Workdays-3 *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1056 82 *$LAYER Main # PARAMETERS 10 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Night Vent" (Type 14) * UNIT 37 TYPE 14 Vent *$UNIT_NAME Night Vent *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 1116 82 *$LAYER Main # PARAMETERS 12 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 0.0000000000000000E+00 1.0000000000000000E+00 6.5000000000000000E+00 1.0000000000000000E+00 6.5000000000000000E+00 0.0000000000000000E+00 2.3000000000000000E+01 0.0000000000000000E+00 2.3000000000000000E+01 1.0000000000000000E+00 2.4000000000000000E+01 1.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "Vent Temp" * EQUATIONS 2 tempnightvent = Tvent*[13,1]*[23,1]*[32,1]*nonholiday+19*(1-[13,1])*[23,1]*[32,1]*nonholiday+[331,7]*[14,1]*[37,1] Tvent = 19 *$UNIT_NAME Vent Temp *$LAYER Main *$POSITION 580 61 *------------------------------------------------------------------------------ * EQUATIONS "Qairconditioning" * EQUATIONS 1 Qairconditioning = winterdayvent *$UNIT_NAME Qairconditioning *$LAYER Main *$POSITION 1155 424 *------------------------------------------------------------------------------ * Model "sum " (Type 28) * UNIT 41 TYPE 28 *$UNIT_NAME sum *$MODEL .\Output\Simulation Summary\Results to External File\Without Energy Balance\Type28b.tmf *$POSITION 1136 840 *$LAYER Main # PARAMETERS 25 ! 1 Summary interval ! 2 Summary start time ! 3 Summary stop time ! 4 Logical unit for the output file ! 5 Output mode ! 6 Operation code-1 ! 7 Operation code-2 ! 8 Operation code-3 ! 9 Operation code-4 ! 10 Operation code-5 ! 11 Operation code-6 ! 12 Operation code-7 ! 13 Operation code-8 ! 14 Operation code-9 ! 15 Operation code-10 ! 16 Operation code-11 ! 17 Operation code-12 ! 18 Operation code-13 ! 19 Operation code-14 ! 20 Operation code-15 ! 21 Operation code-16 ! 22 Operation code-17 ! 23 Operation code-18 ! 24 Operation code-19 ! 25 Operation code-20 7.3000000000000000E+02 0.0000000000000000E+00 8.7600000000000000E+03 3.4300000000000000E+02 1.0000000000000000E+00 -1.1000000000000000E+01 -4.0000000000000000E+00 -1.2000000000000000E+01 -4.0000000000000000E+00 -1.3000000000000000E+01 -4.0000000000000000E+00 -1.4000000000000000E+01 -4.0000000000000000E+00 -1.5000000000000000E+01 -4.0000000000000000E+00 -1.6000000000000000E+01 -4.0000000000000000E+00 -1.7000000000000000E+01 -4.0000000000000000E+00 -1.8000000000000000E+01 -4.0000000000000000E+00 -1.9000000000000000E+01 -4.0000000000000000E+00 -2.0000000000000000E+01 -4.0000000000000000E+00 INPUTS 10 ! Building: 23- DQAIR_ROOM228 ->Summary input-1 ! Building: 24- QINF_ROOM228_#2 ->Summary input-2 ! Building: 25- QVENT_ROOM228_#2 ->Summary input-3 ! Building: 26- QHEAT_ROOM228_#2 ->Summary input-4 ! Building: 27- QCOOL_ROOM228_#2 ->Summary input-5 ! Building: 28- QLATG_ROOM228 ->Summary input-6 ! Building: 29- QGCONV_ROOM228 ->Summary input-7 ! Building: 30- QGRAD_ROOM228 ->Summary input-8 ! Building: 31- QTWG_ROOM228 ->Summary input-9 ! Building: 32- QTSABS_ROOM228 ->Summary input-10 56,23 56,24 56,25 56,26 56,27 56,28 56,29 56,30 56,31 56,32 *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 LABELS 10 DQAIR QINF QVENT QHEAT QCOOL QLATG QGCONV QGRAD QTWG QTSABS *** External files ASSIGN sum.sum 343 *|? File for the summary results |1000 *------------------------------------------------------------------------------ * Model "MarchtoNov" (Type 14) * UNIT 40 TYPE 14 *$UNIT_NAME MarchtoNov *$MODEL .\Utility\Forcing Functions\General\Type14h.tmf *$POSITION 559 797 *$LAYER Main # PARAMETERS 12 ! 1 Initial value of time ! 2 Initial value of function ! 3 Time at point-1 ! 4 Value at point -1 ! 5 Time at point-2 ! 6 Value at point -2 ! 7 Time at point-3 ! 8 Value at point -3 ! 9 Time at point-4 ! 10 Value at point -4 ! 11 Time at point-5 ! 12 Value at point -5 0.0000000000000000E+00 0.0000000000000000E+00 1.4160000000000000E+03 0.0000000000000000E+00 1.4160000000000000E+03 1.0000000000000000E+00 8.0160000000000000E+03 1.0000000000000000E+00 8.0160000000000000E+03 0.0000000000000000E+00 8.7600000000000000E+03 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "S_South" * EQUATIONS 1 Shading_South = summerday*S_SOUTH *$UNIT_NAME S_South *$LAYER Main *$POSITION 737 797 *------------------------------------------------------------------------------ * EQUATIONS "SummerDay" * EQUATIONS 1 summerday = lt(23,[44,2]) *$UNIT_NAME SummerDay *$LAYER Main *$POSITION 600 904 *------------------------------------------------------------------------------ * Model "Type93" (Type 93) * UNIT 44 TYPE 93 *$UNIT_NAME Type93 *$MODEL .\Utility\Input Value Recall\Type93.tmf *$POSITION 777 910 *$LAYER Main # PARAMETERS 2 ! 1 Number of inputs to be stored ! 2 Number of timesteps to be stored 1.0000000000000000E+00 2.0000000000000000E+00 INPUTS 2 ! Building: 14- TSI_S7 ->Input value ! [unconnected] Noname 56,14 CONST *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 *------------------------------------------------------------------------------ END TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00 STOPPING AT TIME = 8.7600000000000000E+03 TIMESTEP = 1 / 10 DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03 ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03 DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : The following Types were loaded from TRNDll.dll: Type14, Type24, Type9, Type65, Type91, Type28, Type93, Type56, Type69, Type109, Type2, Type33 *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "Type157_demo_debug.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "type200.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "type280.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "type340.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "type370.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded) Reported information : 0 user DLLs were loaded after searching in "C:\Programme\TRNSYS16_1\UserLib\DebugDLLs" *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : TRNFLOW multi zone air flow model integrated *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : Active layers and internal window calculations integrated *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : Star network calculation: every iteration step of TRNSYS *** Fatal Error at time : 0.000000 Generated by Unit : 44 Generated by Type : 93 TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an inconsistency in the specified component between the input file and the information expected by the Type Reported information : An illegal number of INPUTS has been specified for this component. Please check the component configuration. 1 INPUTS are required and 2 were specified. ========================================================================================== TYPE109 TIME REPORT: (for debugging purpose) ------------------------------------------------------------------------------------------ time_report_unit: 6 time_filter: .8760E+07 [ms] ========================================================================================== Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms] ========================================================================================== zwischenzeit 1 : 0.000000000000000E+000 zwischenzeit 2 : 0.000000000000000E+000 zwischenzeit 3 : 0.000000000000000E+000 zwischenzeit 4 : 0.000000000000000E+000 zwischenzeit 5 : 0.000000000000000E+000 zwischenzeit 6 : 0.000000000000000E+000 zwischenzeit 7 : 0.000000000000000E+000 zwischenzeit 8 : 0.000000000000000E+000 zwischenzeit 9 : 0.000000000000000E+000 zwischenzeit 10 : 0.000000000000000E+000 itest : 0 Summe : 0.000000000000000E+000 ========================================================================================== TYPE56 TIME REPORT: (for debugging purpose) ------------------------------------------------------------------------------------------ time_report_unit: 6 time_filter: .8760E+07 [ms] ========================================================================================== Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms] ========================================================================================== ********************************************************************************************************* The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File: 13 2 4 14 9 6 16 14 9 17 24 30 18 28 31 22 33 32 23 56 33 25 65 34 26 69 35 27 91 36 28 93 343 29 109 344 31 345 32 346 36 347 37 348 40 349 41 350 44 351 56 352 69 353 109 200 202 331 ********************************************************************************************************* Total TRNSYS Calculation Time: 5.5900 Seconds