[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Restaurant absorp. cooling Tess example



Thank you, I found the weather block it was in the hidden layer.
I have one more issue, as I understand the absorption chiller always modulate its power so it can reach the chilled water set point temperature? - so does it mean that with this type 107 it is not possible to make simulations with different chiller powers(rated capacity) and see how they affect on the system? 

Kind regards
Martin




On Fri, Apr 25, 2014 at 2:48 AM, Jeremy Osborne <jeremy.osborne@solem-consulting.com> wrote:

Hi Martin,

 

The weather data is hidden in a layer. Go to view -> show layers -> and enable weather - data files and you should see TYPE15-2 appear with all the connection.

 

Layers are used to better organise complex models, removing certain clutter.

 

Regards,
Jeremy

 

SOLEM Consulting Pty Ltd

Jeremy Osborne | Project Engineer BE 

525 Harris St | SYDNEY NSW 2007| Australia

P:  +61 2 8006 7355

M: +61 421 914 516

E: jeremy.osborne@solem-consulting.com 

W: www.solem-consulting.com

Follow our useful updates: linkedin.com/company/solem-consulting

 

Please consider the environment before printing this email 

 

PLEASE NOTE

 

The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify the sender by return email. Thank you. To the extent permitted by law, Solem Consulting does not represent, warrant and/or guarantee the integrity of this communication has been maintained nor the communication is free of error, virus, interception or interference.

 

 

From: Martin Berov [mailto:martber88@gmail.com]
Sent: Thursday, 24 April 2014 8:02 PM
To: trnsys-users@cae.wisc.edu
Subject: [TRNSYS-users] Restaurant absorp. cooling Tess example

 

Hi,

 

I was looking at the example provided  with the Tess library about the Restaurant absorption chilling, so the simulation runs ok, but I can not find the weather block i.e. the collector and building are not connected to it -how is this possible, how does it function, can someone give me explanation?

 

Thank you

 

Best Regards

Martin