Re: [TRNSYS-users] Data generated using TRNSYS

[David BRADLEY <d.bradley@tess-inc.com>]

Metkell,
  The plotter (Type65) is just plotting the outputs of other components that are being passed to it as its inputs. If you want to have a file written out at the end of your simulation containing the values that were plotted then you can either use a printer component such as Type25 or you can replace the Type65 with the version of Type65 that automatically creates an output file containing the plotted numbers (Type65c)
David
 

On 3/28/2014 08:55, metkell yebiyo wrote:

Dear TRNSYS users,

Does anyone know how to get hold of the raw data generated by TRNSYS. Say you have a model of GSHP, once you run the model it will generate COP, flow and return temperatures etc. Now how would you get hold of or transfer the raw data you are seeing on the graph please?

Regards,

Metkel

Metkel Yebiyo BEng (Hons), MSc

CEREB PhD Researcher - Ground Source Heat Pumps

Room T615

Department of Urban Engineering

Faculty of Engineering, Science and the Built Environment

London South Bank University,

103 Borough Road,

London SE1 0AA

Tel: +44 (0)20 7815 7639

E: yebiyom@lsbu.ac.uk

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com