Please,
Can you cross me off the mailing list. Thanks.
Youness AJAJI
Research Engineer
Tel: +32-(0)63 230 917
Fax: +32-(0)63 230 800
email: youness.ajaji@ulg.ac.be
WEB: http://www.bems.ulg.ac.be
De : trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] De la part de hotline
Envoyé : mardi 18 février 2014 11:26
À : 'TRNSYS users mailing list at the Solar Energy Lab, UW-Madison'
Objet : Re: [TRNSYS-users] Effective use of overall glass transmission coefficient by Trnbuild
Hi Antoine,
as you mentioned, the U-Value is calculated based on the thermal properties of the glazing. The U-Value
displayed in TRNBuild is the U-value computed according to the reference conditions given in the standard EN410.
It is only used for user information and supports choosing the right glazing.
Best
__________________________________________________________________________________________________
Jochen Lam
TRNSYS Software Team
Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax: +49 711 67976-11
Email: jlam@transsolar.com
Web: www.trnsys.de
Von: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] Im Auftrag von Antoine Gautier
Gesendet: Dienstag, 18. Februar 2014 11:11
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Effective use of overall glass transmission coefficient by Trnbuild
Hi
Looking at the documentation p. 5-111 (Window data used by the Type 56) and 5-167 (Heat Flux between Window Panes) I do not understand what is the exact use of the overall glass transmission coefficient in Trnbuild. Indeed it seems that the overall transmission is rather computed based on the physical properties of glass and gap layers. If the value from the Window file is indeed used could you please confirm me the actual ambient conditions: have they been changed to be closer to the standardized ones?
Thanks a lot for your help
--
Antoine Gautier
Solamen
+33 6 58 24 02 60