[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] (no subject)

Ali,
  I would highly recommend that you use Type56 and its interfaces Trnsys3D and TrnBuild in order to define your building. Type19 is not a very easy component with which to work. If you must use Type19 then I would recommend that you start by running the Type19 example (..\Trnsys17\Examples\Detailed Single Zone\Detailed single zone.tpf) and then begin to modify the example to suit your needs instead of starting from scratch.
Kind regards,
 David


On 11/25/2013 03:32, ali javed wrote:
dear all

i hope all of you will be fine. I have a problem i have calculated the cooling load of an office room manually now i want to use type 19 for the calculation of cooling load how i can put the specifications of the office building in this type.



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users


-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com